EM::Horizon2D Class Reference

2D Horizon. The Horizon is only present along 2d lines, set by addLine. Each position's subid is formed by RowCol( lineid, tracenr ).getInt64(). If multiple z-values per trace is needed, multiple sections can be added. More...

Inheritance diagram for EM::Horizon2D:

Public Member Functions
	Horizon2D (EM::EMManager &)
Array1D< float > *	createArray1D (SectionID, Pos::GeomID geomid, const ZAxisTransform *=0) const
Horizon2DGeometry &	geometry ()
const Horizon2DGeometry &	geometry () const
virtual Coord3	getCoord (const TrcKey &) const
Coord3	getPos (const EM::PosID &) const
Coord3	getPos (const EM::SectionID &, const EM::SubID &) const
Coord3	getPos (EM::SectionID, Pos::GeomID, int trc) const
Coord3	getPosition (EM::SectionID, int lidx, int trcnr) const
TypeSet< Coord3 >	getPositions (int lineidx, int trcnr) const
TrcKey::SurvID	getSurveyID () const
const char *	getTypeStr () const
uiString	getUserTypeStr () const
virtual float	getZ (const TrcKey &) const
virtual float	getZValue (const Coord &, bool allow_udf=true, int nr=0) const
virtual bool	hasZ (const TrcKey &) const
virtual bool	isAttrib (const TrcKey &, int attr) const
virtual bool	isNodeSourceType (const PosID &, NodeSourceType) const
virtual bool	isNodeSourceType (const TrcKey &, NodeSourceType) const
virtual void	removeAll ()
void	removeSelected (const Selector< Coord3 > &selector, TaskRunner *tr)
bool	setArray1D (const Array1D< float > &, const StepInterval< int > &trcrg, SectionID sid, Pos::GeomID geomid, bool onlyfillundefs)
bool	setArray1D (const Array1D< float > &, SectionID sid, Pos::GeomID geomid, bool onlyfillundefs)
virtual void	setAttrib (const TrcKey &, int attr, int yn, bool addtohist)
void	setNewName ()
virtual void	setNodeSourceType (const TrcKey &, NodeSourceType)
bool	setPos (const EM::PosID &, const Coord3 &, bool addtohist)
bool	setPos (const EM::SectionID &, const EM::SubID &, const Coord3 &, bool addtohist)
bool	setPos (EM::SectionID, Pos::GeomID geomid, int trcnr, float z, bool addtohist)
virtual bool	setZ (const TrcKey &, float z, bool addtohist)
virtual bool	setZAndNodeSourceType (const TrcKey &, float z, bool addtohist, NodeSourceType type=Auto)
bool	unSetPos (const EM::PosID &, bool addtohist)
bool	unSetPos (const EM::SectionID &, const EM::SubID &, bool addtohist)
Public Member Functions inherited from EM::Horizon
virtual void	fillPar (IOPar &par) const
void	setStratLevelID (int lvlid)
int	stratLevelID () const
virtual bool	usePar (const IOPar &par)
Public Member Functions inherited from EM::Surface
virtual void	apply (const Pos::Filter &)
bool	canSetSectionName () const
virtual EMObjectIterator *	createIterator (const SectionID &, const TrcKeyZSampling *=0) const
const char *	dbInfo () const
bool	enableGeometryChecks (bool)
bool	isAtEdge (const EM::PosID &) const
bool	isGeometryChecksEnabled () const
bool	isLoaded () const
virtual Executor *	loader ()
int	nrSections () const
bool	removeSection (SectionID, bool hist)
virtual Executor *	saver ()
virtual Executor *	saver (IOObj *)
EM::SectionID	sectionID (int) const
BufferString	sectionName (const SectionID &) const
void	setDBInfo (const char *s)
bool	setSectionName (const SectionID &, const char *, bool addtohistory)
Public Member Functions inherited from EM::EMObject
virtual void	addPosAttrib (int attr)
virtual int	addPosAttribName (const char *)
void	changePosID (const EM::PosID &from, const EM::PosID &to, bool addtohistory)
void	emptyRemovedPolySelectedPosBox ()
uiString	errMsg () const
virtual void	fillDisplayPar (IOPar &) const
virtual void	getLinkedPos (const EM::PosID &posid, TypeSet< EM::PosID > &) const
virtual const Color &	getLockColor () const
virtual const Array2D< char > *	getLockedNodes () const
const TypeSet< PosID > *	getPosAttribList (int attr) const
const MarkerStyle3D &	getPosAttrMarkerStyle (int attr) const
const TrcKeyZSampling	getRemovedPolySelectedPosBox ()
const Color &	getSelectionColor () const
bool	hasBurstAlert () const
virtual bool	hasLockedNodes () const
virtual bool	hasNodeSourceType (const PosID &) const
virtual bool	hasPosAttrib (int attr) const
const ObjectID &	id () const
virtual bool	isChanged () const
virtual bool	isDefined (const EM::PosID &) const
virtual bool	isDefined (const EM::SectionID &, const EM::SubID &) const
virtual bool	isEmpty () const
bool	isFullyLoaded () const
bool	isInsideSelRemoval () const
virtual bool	isLocked () const
virtual bool	isNodeLocked (const PosID &) const
virtual bool	isNodeLocked (const TrcKey &) const
virtual bool	isOK () const
virtual bool	isPosAttrib (const EM::PosID &, int attr) const
virtual bool	isPosAttribLocked (int attr) const
bool	isSelRemoving () const
virtual void	lock (bool yn)
virtual void	lockAll ()
virtual void	lockPosAttrib (int attr, bool yn)
	mDeclInstanceCreatedNotifierAccess (EMObject)
const MultiID &	multiID () const
virtual int	nrPosAttribs () const
virtual int	posAttrib (int idx) const
virtual const char *	posAttribName (int) const
const Color &	preferredColor () const
const OD::LineStyle &	preferredLineStyle () const
void	removeAllUnSeedPos ()
void	removeListOfSubIDs (const TypeSet< EM::SubID > &, const EM::SectionID &)
virtual void	removePosAttribList (int attr, bool addtohistory=true)
void	removeSelected (const TypeSet< EM::SubID > &)
virtual void	resetChangedFlag ()
void	saveDisplayPars () const
Geometry::Element *	sectionGeometry (const SectionID &)
const Geometry::Element *	sectionGeometry (const SectionID &) const
virtual int	sectionIndex (const SectionID &) const
void	setBurstAlert (bool yn)
virtual void	setChangedFlag ()
void	setErrMsg (const uiString &m)
void	setFullyLoaded (bool yn)
virtual void	setLockColor (const Color &)
void	setMultiID (const MultiID &)
virtual void	setNodeLocked (const TrcKey &, bool locked)
virtual void	setPosAttrib (const EM::PosID &, int attr, bool yn, bool addtohistory=true)
	Sets/unsets the posattrib depending on yn. More...
void	setPosAttrMarkerStyle (int attr, const MarkerStyle3D &)
void	setPreferredColor (const Color &, bool addtohistory=false)
void	setPreferredLineStyle (const OD::LineStyle &)
void	setSelectionColor (const Color &)
mDeprecatedDef uiString	uiName () const
virtual void	unlockAll ()
virtual bool	useDisplayPar (const IOPar &)
Public Member Functions inherited from NamedCallBacker
	NamedCallBacker (const char *nm=0)
	NamedCallBacker (const NamedCallBacker &)
virtual Notifier< NamedCallBacker > &	objectToBeDeleted () const
bool	operator== (const NamedCallBacker &oth) const
bool	operator== (const NamedObject &oth) const
Public Member Functions inherited from CallBacker
	CallBacker ()
	CallBacker (const CallBacker &)
virtual	~CallBacker ()
bool	attachCB (const NotifierAccess &, const CallBack &, bool onlyifnew=false) const
bool	attachCB (const NotifierAccess *notif, const CallBack &cb, bool onlyifnew=false) const
void	detachAllNotifiers () const
	Call from the destructor of your inherited object. More...
void	detachCB (const NotifierAccess &, const CallBack &) const
void	detachCB (const NotifierAccess *notif, const CallBack &cb) const
virtual bool	isCapsule () const
bool	isNotifierAttached (const NotifierAccess *) const
	Only for debugging purposes, don't use. More...
void	stopReceivingNotifications () const
Public Member Functions inherited from NamedObject
	NamedObject (const char *nm=nullptr)
	NamedObject (const NamedObject &oth)
virtual	~NamedObject ()
virtual BufferString	getName () const
bool	getNameFromPar (const IOPar &)
virtual const name_type &	name () const
NamedObject &	operator= (const NamedObject &)
bool	operator== (const NamedObject &oth) const
virtual void	setName (const char *nm)
Public Member Functions inherited from ObjectWithName
virtual	~ObjectWithName ()
bool	hasName (const char *nm) const
bool	hasName (const name_type &nm) const
void	putNameInPar (IOPar &) const
Public Member Functions inherited from RefCount::Referenced
void	addObserver (WeakPtrBase *obs)
	Not for normal use. May become private. More...
int	nrRefs () const
	Only for expert use. More...
void	ref () const
bool	refIfReffed () const
	Don't use in production, for debugging. More...
void	removeObserver (WeakPtrBase *obs)
	Not for normal use. May become private. More...
bool	tryRef () const
	Not for normal use. May become private. More...
void	unRef () const
void	unRefNoDelete () const

Static Public Member Functions
static Horizon2D *	create (const char *nm)
static EMObject *	create (EM::EMManager &)
static void	initClass ()
static FixedString	typeStr ()
static uiString	userTypeStr ()
Static Public Member Functions inherited from EM::Surface
static BufferString	getParentChildFileName (const IOObj &)
static BufferString	getParFileName (const IOObj &)
static BufferString	getSetupFileName (const IOObj &)
Static Public Member Functions inherited from EM::EMObject
static int	sEdgeControlNode ()
static int	sIntersectionNode ()
static int	sPermanentControlNode ()
static int	sSeedNode ()
static int	sTemporaryControlNode ()
static int	sTerminationNode ()
Static Public Member Functions inherited from CallBacker
static void	createReceiverForCurrentThread ()
static void	removeReceiverForCurrentThread ()
Static Public Member Functions inherited from RefCount::Referenced
static bool	isSane (const Referenced *)

Protected Member Functions
	~ Horizon2D ()
const IOObjContext &	getIOObjContext () const
void	initNodeSourceArray (const TrcKey &)
Protected Member Functions inherited from EM::Horizon
	Horizon (EMManager &emm)
Protected Member Functions inherited from EM::Surface
	Surface (EMManager &)
	~Surface ()
virtual Geometry::Element *	sectionGeometryInternal (const SectionID &)
Protected Member Functions inherited from EM::EMObject
	EMObject (EMManager &)
	must be called after creation More...
	~EMObject ()
void	posIDChangeCB (CallBacker *)
const MarkerStyle3D &	preferredMarkerStyle3D () const
virtual void	prepareForDelete ()
virtual void	prepareForDelete () const
void	setPreferredMarkerStyle3D (const MarkerStyle3D &)
void	useDisplayPars (const IOPar &)
Protected Member Functions inherited from NamedCallBacker
void	sendDelNotif () const
Protected Member Functions inherited from RefCount::Referenced
	Referenced ()
	Referenced (const Referenced &)
virtual	~Referenced ()
Referenced &	operator= (const Referenced &)

Protected Attributes
Horizon2DGeometry	geometry_
Array1D< char > *	nodesource_
StepInterval< int >	trackingsampling_
Protected Attributes inherited from EM::Horizon
int	stratlevelid_
Protected Attributes inherited from EM::Surface
BufferString	dbinfo
Protected Attributes inherited from EM::EMObject
TypeSet< int >	attribs_
int	burstalertcount_
bool	changed_
uiString	errmsg_
bool	fullyloaded_
bool	haslockednodes_
ObjectID	id_
bool	insideselremoval_
Color	lockcolor_
bool	locked_
class EMManager &	manager_
BufferString	objname_
MarkerStyle3D &	posattribmarkerstyle_
ObjectSet< PosAttrib >	posattribs_
Color &	preferredcolor_
OD::LineStyle &	preferredlinestyle_
MarkerStyle3D &	preferredmarkerstyle_
TrcKeyZSampling	removebypolyposbox_
Color	selectioncolor_
bool	selremoving_
Threads::Lock	setposlock_
MultiID	storageid_
Protected Attributes inherited from NamedCallBacker
Threads::Atomic< bool >	delalreadytriggered_
Notifier< NamedCallBacker >	delnotif_
Protected Attributes inherited from NamedObject
BufferString	name_

Additional Inherited Members
Public Types inherited from EM::EMObject
enum	NodeSourceType { None = (int)'0' , Manual =(int)'1' , Auto =(int)'2' , Gridding =(int)'3' }
Public Types inherited from ObjectWithName
typedef OD::String	name_type
Public Attributes inherited from EM::EMObject
CNotifier< EMObject, const EMObjectCallbackData & >	change
Static Protected Member Functions inherited from EM::EMObject
static const char *	nrposattrstr ()
static const char *	posattrposidstr ()
static const char *	posattrprefixstr ()
static const char *	posattrsectionstr ()

Detailed Description

2D Horizon. The Horizon is only present along 2d lines, set by addLine. Each position's subid is formed by RowCol( lineid, tracenr ).getInt64(). If multiple z-values per trace is needed, multiple sections can be added.

<>

Constructor & Destructor Documentation

Horizon2D()

EM::Horizon2D::Horizon2D

(

EM::EMManager &

)

~ Horizon2D()

EM::Horizon2D::~ Horizon2D ( )

protected

Member Function Documentation

create() [1/2]

static Horizon2D* EM::Horizon2D::create ( const char *  nm )

static

create() [2/2]

static EMObject* EM::Horizon2D::create ( EM::EMManager &  )

static

createArray1D()

Array1D<float>* EM::Horizon2D::createArray1D	(	SectionID	,
		Pos::GeomID	geomid,
		const ZAxisTransform *	= 0
	)		const

geometry() [1/2]

Horizon2DGeometry& EM::Horizon2D::geometry ( )

inlinevirtual

Implements EM::Horizon.

geometry() [2/2]

const Horizon2DGeometry& EM::Horizon2D::geometry ( ) const

inlinevirtual

Reimplemented from EM::Horizon.

getCoord()

virtual Coord3 EM::Horizon2D::getCoord ( const TrcKey &  ) const

virtual

Implements EM::Horizon.

getIOObjContext()

const IOObjContext& EM::Horizon2D::getIOObjContext ( ) const

protectedvirtual

Implements EM::Horizon.

getPos() [1/3]

Coord3 EM::Horizon2D::getPos ( const EM::PosID &  ) const

virtual

Reimplemented from EM::EMObject.

getPos() [2/3]

Coord3 EM::Horizon2D::getPos ( const EM::SectionID &  , const EM::SubID &    ) const

virtual

Reimplemented from EM::EMObject.

getPos() [3/3]

Coord3 EM::Horizon2D::getPos	(	EM::SectionID	,
		Pos::GeomID	,
		int	trc
	)		const

getPosition()

Coord3 EM::Horizon2D::getPosition	(	EM::SectionID	,
		int	lidx,
		int	trcnr
	)		const

getPositions()

TypeSet<Coord3> EM::Horizon2D::getPositions	(	int	lineidx,
		int	trcnr
	)		const

getSurveyID()

TrcKey::SurvID EM::Horizon2D::getSurveyID ( ) const

virtual

Implements EM::Horizon.

getTypeStr()

const char* EM::Horizon2D::getTypeStr ( ) const

virtual

Implements EM::EMObject.

getUserTypeStr()

uiString EM::Horizon2D::getUserTypeStr ( ) const

inlinevirtual

Implements EM::EMObject.

getZ()

virtual float EM::Horizon2D::getZ ( const TrcKey &  ) const

virtual

Implements EM::Horizon.

getZValue()

virtual float EM::Horizon2D::getZValue ( const Coord &  , bool  allow_udf = true, int  nr = 0  ) const

virtual

Convenience function. If you need speed, don't use it.

Implements EM::Horizon.

hasZ()

virtual bool EM::Horizon2D::hasZ ( const TrcKey &  ) const

virtual

Implements EM::Horizon.

initClass()

static void EM::Horizon2D::initClass ( )

static

initNodeSourceArray()

void EM::Horizon2D::initNodeSourceArray ( const TrcKey &  )

protected

isAttrib()

virtual bool EM::Horizon2D::isAttrib ( const TrcKey &  , int  attr  ) const

virtual

Implements EM::Horizon.

isNodeSourceType() [1/2]

virtual bool EM::Horizon2D::isNodeSourceType ( const PosID &  , NodeSourceType    ) const

virtual

Reimplemented from EM::EMObject.

isNodeSourceType() [2/2]

virtual bool EM::Horizon2D::isNodeSourceType ( const TrcKey &  , NodeSourceType    ) const

virtual

Reimplemented from EM::EMObject.

removeAll()

virtual void EM::Horizon2D::removeAll ( )

virtual

Reimplemented from EM::Surface.

removeSelected()

void EM::Horizon2D::removeSelected ( const Selector< Coord3 > &  selector, TaskRunner *  tr  )

virtual

Reimplemented from EM::EMObject.

setArray1D() [1/2]

bool EM::Horizon2D::setArray1D	(	const Array1D< float > &	,
		const StepInterval< int > &	trcrg,
		SectionID	sid,
		Pos::GeomID	geomid,
		bool	onlyfillundefs
	)

setArray1D() [2/2]

bool EM::Horizon2D::setArray1D	(	const Array1D< float > &	,
		SectionID	sid,
		Pos::GeomID	geomid,
		bool	onlyfillundefs
	)

setAttrib()

virtual void EM::Horizon2D::setAttrib ( const TrcKey &  , int  attr, int  yn, bool  addtohist  )

virtual

Implements EM::Horizon.

setNewName()

void EM::Horizon2D::setNewName ( )

virtual

Reimplemented from EM::EMObject.

setNodeSourceType()

virtual void EM::Horizon2D::setNodeSourceType ( const TrcKey &  , NodeSourceType    )

virtual

Reimplemented from EM::EMObject.

setPos() [1/3]

bool EM::Horizon2D::setPos ( const EM::PosID &  , const Coord3 &  , bool  addtohist  )

virtual

Reimplemented from EM::EMObject.

setPos() [2/3]

bool EM::Horizon2D::setPos ( const EM::SectionID &  , const EM::SubID &  , const Coord3 &  , bool  addtohist  )

virtual

Reimplemented from EM::EMObject.

setPos() [3/3]

bool EM::Horizon2D::setPos	(	EM::SectionID	,
		Pos::GeomID	geomid,
		int	trcnr,
		float	z,
		bool	addtohist
	)

setZ()

virtual bool EM::Horizon2D::setZ ( const TrcKey &  , float  z, bool  addtohist  )

virtual

Implements EM::Horizon.

setZAndNodeSourceType()

virtual bool EM::Horizon2D::setZAndNodeSourceType ( const TrcKey &  , float  z, bool  addtohist, NodeSourceType  type = Auto  )

virtual

Implements EM::Horizon.

typeStr()

static FixedString EM::Horizon2D::typeStr ( )

static

unSetPos() [1/2]

bool EM::Horizon2D::unSetPos ( const EM::PosID &  , bool  addtohist  )

virtual

Reimplemented from EM::EMObject.

unSetPos() [2/2]

bool EM::Horizon2D::unSetPos ( const EM::SectionID &  , const EM::SubID &  , bool  addtohist  )

virtual

Reimplemented from EM::EMObject.

userTypeStr()

static uiString EM::Horizon2D::userTypeStr ( )

inlinestatic

Member Data Documentation

geometry_

Horizon2DGeometry EM::Horizon2D::geometry_

protected

nodesource_

Array1D<char>* EM::Horizon2D::nodesource_

protected

'0'- non interpreted, '1'- manual interpreted, '2' - auto interpreted. '3' - Gridding. enum NodeSourceType

trackingsampling_

StepInterval<int> EM::Horizon2D::trackingsampling_

protected