Attrib::GapDecon Class Reference

Gap deconvolution attribute. More...

Inheritance diagram for Attrib::GapDecon:

Public Member Functions
	GapDecon (Desc &)
void	prepareForComputeData ()
Public Member Functions inherited from Attrib::Provider
void	addLocalCompZIntervals (const TypeSet< Interval< int > > &)
virtual void	adjust2DLineStoredVolume ()
int	alignInputs (ObjectSet< Provider > &)
int	comparePosAndAlign (Provider *, bool, Provider *, bool, bool)
virtual bool	compDistBetwTrcsStats (bool force=false)
void	computeNewStartPos (BinID &)
void	computeRefStep ()
void	computeRefZ0 ()
void	enableAllOutputs (bool yn=true)
void	enableOutput (int output, bool yn=true)
uiString	errMsg () const
virtual void	fillDataPackWithTrc (RegularSeisDataPack *) const
float	getApplicableCrlDist (bool) const
virtual void	getCompNames (BufferStringSet &) const
virtual void	getCompOutputIDs (TypeSet< int > &) const
Coord	getCoord (const BinID &) const
Coord	getCurrentCoord () const
BinID	getCurrentPosition () const
virtual const SeisTrcInfo *	getCurrentTrcInfo () const
const DataHolder *	getData (const BinID &relpos=BinID(0, 0), int idx=0)
const DataHolder *	getDataDontCompute (const BinID &relpos) const
bool	getDataUnavailableFlag () const
const BinID &	getDesBufStepout () const
Desc &	getDesc ()
const Desc &	getDesc () const
const TrcKeyZSampling *	getDesiredVolume () const
virtual float	getDistBetwTrcs (bool, const char *linenm=0) const
BinID	getElementStepout () const
virtual Pos::GeomID	getGeomID () const
ObjectSet< Provider > &	getInputs ()
const TrcKeyZSampling *	getPossibleVolume () const
virtual bool	getPossibleVolume (int outp, TrcKeyZSampling &)
float	getRefStep () const
float	getRefZ0 () const
const BinID &	getReqBufStepout () const
virtual BinID	getStepoutStep () const
int	getTotalNrPos (bool)
BinID	getTrcInfoBid () const
virtual void	initSteering ()
bool	is2D () const
virtual bool	isOK () const
bool	isOutputEnabled (int output) const
virtual bool	isSingleTrace () const
const TypeSet< Interval< int > > &	localCompZIntervals () const
virtual int	moveToNextTrace (BinID startpos=BinID(-1,-1), bool firstcheck=false)
virtual bool	needStoredInput () const
int	nrOutputs () const
virtual void	prepPriorToBoundsCalc ()
virtual bool	prepPriorToOutputSetup ()
virtual void	prepSteeringForStepout (const BinID &)
void	resetDesiredVolume ()
void	resetMoved ()
void	resetZIntervals ()
void	setCurLineName (const char *)
virtual bool	setCurrentPosition (const BinID &)
void	setDataUnavailableFlag (bool yn)
virtual void	setDesBufStepout (const BinID &, bool wait=false)
void	setDesiredVolume (const TrcKeyZSampling &)
void	setExactZ (const TypeSet< float > &)
void	setExtraZ (const Interval< float > &)
virtual void	setGeomID (Pos::GeomID)
void	setNeedInterpol (bool)
void	setOutputInterestSize (bool preserve=false)
void	setPossibleVolume (const TrcKeyZSampling &)
virtual void	setRdmPaths (TypeSet< BinID > *truepath, TypeSet< BinID > *snappedpath)
	For directional attributes. More...
void	setRefStep (float step)
void	setRefZ0 (float z0)
virtual void	setReqBufStepout (const BinID &, bool wait=false)
void	setSelData (const Seis::SelData *)
void	setUseSC ()
virtual void	updateCSIfNeeded (TrcKeyZSampling &) const
void	updateCurrentInfo ()
void	updateInputReqs (int input=-1)
virtual void	updateStorageReqs (bool all=false)
virtual bool	usesTracePosition () const

Static Public Member Functions
static const char *	attribName ()
static const char *	gapsizeStr ()
static const char *	gateStr ()
static void	initClass ()
static const char *	isinp0phaseStr ()
static const char *	isout0phaseStr ()
static const char *	lagsizeStr ()
static const char *	noiselevelStr ()
static const char *	onlyacorrStr ()
static const char *	stepoutStr ()
Static Public Member Functions inherited from Attrib::Provider
static Provider *	create (Desc &, uiString &errmsg)
static uiString	prepare (Desc &)

Protected Member Functions
bool	allowParallelComputation () const
bool	computeData (const DataHolder &, const BinID &relpos, int z0, int nrsamples, int threadid) const
const Interval< int > *	desZSampMargin (int, int) const
bool	getInputData (const BinID &, int zintv)
Protected Member Functions inherited from Attrib::Provider
	Provider (Desc &)
void	addParent (Provider *prov)
virtual bool	checkInpAndParsAtStart ()
void	computeDesInputCube (int inp, int out, TrcKeyZSampling &, bool usestepout=true) const
float	crlDist () const
virtual const BinID *	desStepout (int input, int output) const
virtual const Interval< float > *	desZMargin (int input, int output) const
float	dipFactor () const
virtual bool	doNotReUseDH () const
void	fillInputRangesArray (Array2DImpl< BasicInterval< int > > &, int, const BasicInterval< int > &)
virtual bool	finalizeCalculation (bool scs)
DataHolder *	getDataHolder (const BinID &relpos)
int	getDataIndex (int input) const
float	getExtraZFromSampInterval (int, int) const
float	getExtraZFromSampPos (float) const
virtual bool	getInputOutput (int input, TypeSet< int > &) const
float	getInputValue (const DataHolder &, int inputidx, int sampleidx, int z0) const
float	getInterpolInputValue (const DataHolder &, int inputidx, float sample, int z0) const
float	getInterpolInputValue (const DataHolder &, int inputidx, float zval) const
virtual SeisMSCProvider *	getMSCProvider (bool &) const
virtual BinDataDesc	getOutputFormat (int output) const
virtual bool	getZ0StoredData (float &z0) const
float	getZAtSample (int idx) const
virtual bool	getZStepStoredData (float &step) const
float	inlDist () const
bool	isNew2DLine () const
bool	isUsedMultTimes ()
float	lineDist () const
float	maxSecureDip () const
virtual int	minTaskSize () const
virtual bool	preProcCommonToAllThreads (const DataHolder &out, const BinID &relpos)
void	removeDataHolder (const BinID &relpos)
virtual const BinID *	reqStepout (int input, int output) const
virtual const Interval< float > *	reqZMargin (int input, int output) const
virtual const Interval< int > *	reqZSampMargin (int input, int output) const
void	setInput (int input, Provider *)
virtual bool	setNrThreads (int idx)
void	setOutputValue (const DataHolder &output, int outputidx, int sampleidx, int z0, float val) const
void	setUsedMultTimes ()
void	stdPrepSteering (const BinID &)
float	trcDist () const
virtual bool	useInterTrcDist () const
float	zFactor () const
bool	zIsTime () const

Static Protected Member Functions
static Provider *	createInstance (Desc &)
static void	updateDesc (Desc &)
Static Protected Member Functions inherited from Attrib::Provider
static Provider *	internalCreate (Desc &, ObjectSet< Provider > &, bool &issame, uiString &)

Protected Attributes
int	dataidx_
int	dataidxmixed_
Interval< int >	dessampgate_
int	gapsize_
Interval< float >	gate_
const float *	hilbfilter_
const DataHolder *	inputdata_
const DataHolder *	inputdatamixed_
bool	isinpzerophase_
bool	isoutzerophase_
int	lagsize_
int	lcorr_
int	ncorr_
int	ngap_
int	nlag_
int	noiselevel_
BinID	stepout_
bool	useonlyacorr_
Protected Attributes inherited from Attrib::Provider
ObjectSet< Provider >	allexistingprov_
bool	alreadymoved_
BinID	currentbid_
const SeisTrcInfo *	curtrcinfo_
bool	dataunavailableflag_
BinID	desbufferstepout_
Desc &	desc_
TrcKeyZSampling *	desiredvolume_
uiString	errmsg_
TypeSet< float >	exactz_
Interval< float >	extraz_
Pos::GeomID	geomid_
ObjectSet< Provider >	inputs_
bool	isusedmulttimes_
DataHolderLineBuffer *	linebuffer_
TypeSet< Interval< int > >	localcomputezintervals_
bool	needinterp_
TypeSet< int >	outputinterest_
ObjectSet< Provider >	parents_
TrcKeyZSampling *	possiblevolume_
int	prevtrcnr_
ProviderTask *	providertask_
float	refstep_
float	refz0_
BinID	reqbufferstepout_
const Seis::SelData *	seldata_
BinID	trcinfobid_
bool	useshortcuts_

Detailed Description

Gap deconvolution attribute.

<>

Constructor & Destructor Documentation

GapDecon()

Attrib::GapDecon::GapDecon

(

Desc &

)

Member Function Documentation

allowParallelComputation()

bool Attrib::GapDecon::allowParallelComputation ( ) const

inlineprotectedvirtual

Reimplemented from Attrib::Provider.

attribName()

static const char* Attrib::GapDecon::attribName ( )

inlinestatic

computeData()

bool Attrib::GapDecon::computeData ( const DataHolder &  output, const BinID &  relpos, int  t0, int  nrsamples, int  threadidx  ) const

protectedvirtual

The system will use the algorithm specified in this function to compute the attribute's outputs. The results will be stored as different series in the DataHolder output.

Parameters

output
relpos
t0
nrsamples
threadidx	thread identifier that may be handy when using multiple threads.

Implements Attrib::Provider.

createInstance()

static Provider* Attrib::GapDecon::createInstance ( Desc &  )

staticprotected

desZSampMargin()

const Interval<int>* Attrib::GapDecon::desZSampMargin ( int  input, int  output  ) const

inlineprotectedvirtual

The gate is specified in the trace samples, and is in addition to the gate specified in desZMargin. The system will try to supply the attribute with the desired gate, but will not take the desired gate into account when computing the volume that can be computed.

Returns

the extra gate desired on input if output is going to be computed, or NULL if no extra gate is desired.

Reimplemented from Attrib::Provider.

gapsizeStr()

static const char* Attrib::GapDecon::gapsizeStr ( )

inlinestatic

gateStr()

static const char* Attrib::GapDecon::gateStr ( )

inlinestatic

getInputData()

bool Attrib::GapDecon::getInputData ( const BinID &  relpos, int  idx  )

protectedvirtual

Gets all imput data, including data for which a stepout is required

Reimplemented from Attrib::Provider.

initClass()

static void Attrib::GapDecon::initClass ( )

static

isinp0phaseStr()

static const char* Attrib::GapDecon::isinp0phaseStr ( )

inlinestatic

isout0phaseStr()

static const char* Attrib::GapDecon::isout0phaseStr ( )

inlinestatic

lagsizeStr()

static const char* Attrib::GapDecon::lagsizeStr ( )

inlinestatic

noiselevelStr()

static const char* Attrib::GapDecon::noiselevelStr ( )

inlinestatic

onlyacorrStr()

static const char* Attrib::GapDecon::onlyacorrStr ( )

inlinestatic

prepareForComputeData()

void Attrib::GapDecon::prepareForComputeData ( )

virtual

Everything is known now.

Reimplemented from Attrib::Provider.

stepoutStr()

static const char* Attrib::GapDecon::stepoutStr ( )

inlinestatic

updateDesc()

static void Attrib::GapDecon::updateDesc ( Desc &  )

staticprotected

Member Data Documentation

dataidx_

int Attrib::GapDecon::dataidx_

protected

dataidxmixed_

int Attrib::GapDecon::dataidxmixed_

protected

dessampgate_

Interval<int> Attrib::GapDecon::dessampgate_

protected

gapsize_

int Attrib::GapDecon::gapsize_

protected

gate_

Interval<float> Attrib::GapDecon::gate_

protected

hilbfilter_

const float* Attrib::GapDecon::hilbfilter_

protected

inputdata_

const DataHolder* Attrib::GapDecon::inputdata_

protected

inputdatamixed_

const DataHolder* Attrib::GapDecon::inputdatamixed_

protected

isinpzerophase_

bool Attrib::GapDecon::isinpzerophase_

protected

isoutzerophase_

bool Attrib::GapDecon::isoutzerophase_

protected

lagsize_

int Attrib::GapDecon::lagsize_

protected

lcorr_

int Attrib::GapDecon::lcorr_

protected

ncorr_

int Attrib::GapDecon::ncorr_

protected

ngap_

int Attrib::GapDecon::ngap_

protected

nlag_

int Attrib::GapDecon::nlag_

protected

noiselevel_

int Attrib::GapDecon::noiselevel_

protected

stepout_

BinID Attrib::GapDecon::stepout_

protected

useonlyacorr_

bool Attrib::GapDecon::useonlyacorr_

protected