Inherits OD::Set.

Inherited by LargeValVec< od_uint64 >, LargeValVec< float >, LargeValVec< idx_type >, TypeSet< uiDirLightDlg::InitInfo >, TypeSet< uiDataPointSet::DColID >, TypeSet< SelectionArea >, TypeSet< Geom::Size2D >, TypeSet< EM::PosID >, TypeSet< VT >, TypeSet< DAGTriangleTree::DAGTriangle >, TypeSet< xT >, TypeSet< Attrib::Scaling::Trend >, TypeSet< TypeSet< Interval< float > > >, TypeSet< ColTab::MapperSetup >, TypeSet< std::pair< VT, AVT > >, TypeSet< Seis::PosKey >, TypeSet< double >, TypeSet< PlotAnnotation >, TypeSet< TypeSet< int > >, TypeSet< Color >, TypeSet< ProviderCreater >, TypeSet< Interval< float > >, TypeSet< CallBack >, TypeSet< Point2D< double > >, TypeSet< WeakPtr< T > >, TypeSet< GlobExpr >, TypeSet< Geom::Point2D< T > >, TypeSet< Math::Formula::InpDef >, TypeSet< Line2DInterSection::Point >, TypeSet< EM::ObjectID >, TypeSet< Creator >, TypeSet< BufferStringSet >, TypeSet< TrcKey >, TypeSet< BinDataDesc >, TypeSet< TrcKeyZSampling >, TypeSet< Location >, TypeSet< uiWellDahDisplay::PickData >, TypeSet< LMPropSpecificDispPars >, TypeSet< OutputSlotID >, TypeSet< VolProc::Chain::Connection >, TypeSet< PreStack::TrimStatics::Iteration >, TypeSet< od_int32 >, TypeSet< TrcKeyValue >, TypeSet< float >, TypeSet< RT >, TypeSet< WellTie::Marker >, TypeSet< IOPar >, TypeSet< uiSetupGrpCreationFunc >, TypeSet< SectionID >, TypeSet< AuxDataType >, TypeSet< FaultID >, TypeSet< Plane3 >, TypeSet< Pos::GeomID >, TypeSet< T ** >, TypeSet< int >, TypeSet< ColTab::Sequence >, TypeSet< uiGenInputFieldIdx >, TypeSet< HelpKey >, TypeSet< SamplingData< int > >, TypeSet< unsigned int >, TypeSet< FourierInterpol2D::Point >, TypeSet< KnotID >, TypeSet< Well::LoadReqs >, TypeSet< float_complex >, TypeSet< Threads::Work >, TypeSet< DataPack::ID >, TypeSet< FourierInterpol3D::Point >, TypeSet< ElasticFormula >, TypeSet< EM::SectionID >, TypeSet< MultiID >, TypeSet< FontData::StdSz >, TypeSet< Table::TargetInfo::Selection::Elem >, TypeSet< V >, TypeSet< MarkerStyle2D >, TypeSet< Coord3 >, TypeSet< Seis::DataType >, TypeSet< uiConstraint >, TypeSet< idx_type >, TypeSet< FourierInterpol1D::Point >, TypeSet< DAGTetrahedraTree::DAGTetrahedra >, TypeSet< unsigned char >, TypeSet< Geom::Point2D >, TypeSet< SeisTrcInfo::Fld >, TypeSet< GaussianNDProbDenFunc::VarDef >, TypeSet< od_int64 >, TypeSet< RowCol >, TypeSet< Attrib::TableOutput::PosAndRowIDPair >, TypeSet< Interval< double > >, TypeSet< char >, TypeSet< Geometry::ExplPlaneIntersection::PlaneIntersection >, TypeSet< GeomPosID >, TypeSet< Geom::Point2D< float > >, TypeSet< TypeSet< float > >, TypeSet< T *** >, TypeSet< TrcKeySampling >, TypeSet< SlabDimSpec >, TypeSet< StepInterval< float > >, TypeSet< GaussianNDProbDenFunc::Corr >, TypeSet< StepInterval< int > >, TypeSet< BinID >, TypeSet< Attrib::DescID >, TypeSet< SpecVar >, TypeSet< ElasticLayer >, TypeSet< visSurvey::VolumeDisplay::IsosurfaceSetting >, TypeSet< uiStoredAttribReplacer::StoredEntry >, TypeSet< MarkerStyle3D::Type >, TypeSet< uiBodyOperatorDlg::BodyOperand >, TypeSet< float * >, TypeSet< SeisInterpol::TrcPosTrl >, TypeSet< PreStackView::PSViewAppearance >, TypeSet< IdxType >, TypeSet< ::DataPack::ID >, TypeSet< Attrib::SelSpec >, TypeSet< Interval< int > >, TypeSet< Seis::GeomType >, TypeSet< MarkerStyle2D::Type >, TypeSet< OD::LineStyle >, TypeSet< DRowID >, TypeSet< InputSlotID >, TypeSet< ReflectivitySpike >, TypeSet< SamplingData< float > >, TypeSet< PosInfo::LineSet2DData::LineTrcDistStats >, TypeSet< PosInfo::CrdBidOffs >, TypeSet< Line2 >, TypeSet< PosInfo::Line2DPos >, TypeSet< Coord >, TypeSet< HdrEntryRecord >, TypeSet< TRowID >, TypeSet< QueueType >, TypeSet< ElasticModel >, TypeSet< PreStackView::GatherInfo >, TypeSet< BufferString >, TypeSet< BoolTypeSetType >, TypeSet< StickID >, TypeSet< EM::SubID >, TypeSet< Coords::AuthorityCode >, TypeSet< BinIDValueSet::SPos >, TypeSet< Attrib::InputSpec >, TypeSet< TypeSet< Interval< int > > >, TypeSet< Point2D< int > >, TypeSet< OffsetAzimuth >, TypeSet< FT >, and TypeSet< yT >.

Public Types
typedef impl_type::const_iterator	const_iterator

typedef const value_type &	const_reference

typedef size_type	difference_type

typedef size_type	idx_type

typedef impl_type::iterator	iterator

typedef T	object_type

typedef value_type &	reference

typedef IT	size_type

typedef T	value_type

Public Member Functions
virtual	~ValVec ()

ValVec &	add (const T &)

virtual bool	addIfNew (const T &)

virtual bool	append (const T *, size_type)

virtual bool	append (const ValVec &)

virtual T *	arr ()
	3rd party access More...

virtual const T *	arr () const

iterator	begin ()

const_iterator	begin () const

const_iterator	cbegin () const

const_iterator	cend () const

ValVec *	clone () const =0

virtual ValVec &	copy (const T *, size_type)

virtual ValVec &	copy (const ValVec &)

size_type	count (const T &) const

virtual void	createDifference (const ValVec &, bool must_preserve_order=false)
	Removes all items present in other set. More...

virtual void	createIntersection (const ValVec &)
	Only keeps common items. More...

virtual void	createUnion (const ValVec &)

bool	empty () const

iterator	end ()

const_iterator	end () const

virtual void	erase ()

T &	first ()

const T &	first () const

T &	get (idx_type)

const T &	get (idx_type) const

virtual size_type	getCapacity () const

idx_type	getIdx (const_iterator it) const

idx_type	getIdx (iterator it) const

virtual idx_type	indexOf (T, bool forward=true, idx_type start=-1) const

virtual void	insert (idx_type, const T &)

bool	isPresent (const T &) const

T &	last ()

const T &	last () const

size_type	max_size () const

virtual void	move (idx_type from, idx_type to)

virtual int64_t	nrItems () const

bool	operator!= (const ValVec &oth) const

ValVec &	operator+= (const T &t)

ValVec &	operator-= (const T &t)

ValVec &	operator= (const ValVec &oth)

bool	operator== (const ValVec &) const

T &	operator[] (idx_type i)

const T &	operator[] (idx_type i) const

T	pop ()

bool	push (const T &)

virtual void	removeRange (idx_type from, idx_type to)

virtual void	removeSingle (idx_type, bool preserver_order=true)

void	replace (T, T)

virtual void	reverse ()

void	setAll (T)

virtual bool	setCapacity (size_type sz, bool withmargin)

virtual bool	setSize (size_type sz, T val=T())

size_type	size () const

void	swap (IT, IT)

void	swap (ValVec &oth)

virtual void	swapItems (int64_t i1, int64_t i2)

virtual void	useIndexes (const idx_type *)

virtual bool	validIdx (int64_t) const

std::vector< T > &	vec ()

const std::vector< T > &	vec () const

Public Member Functions inherited from OD::Set
virtual	~Set ()

bool	isEmpty () const

void	setEmpty ()

Protected Types
typedef VectorAccess< T, IT >	impl_type

Protected Member Functions
	ValVec ()

	ValVec (const T *, size_type nr)

	ValVec (const ValVec &)

	ValVec (size_type nr, T typ)

T *	gtArr () const

Protected Attributes
impl_type	vec_

Additional Inherited Members
Static Public Member Functions inherited from OD::Set
static int	maxIdx32 ()

static int64_t	maxIdx64 ()

Detailed Description

template<class T, class IT>
class OD::ValVec< T, IT >

<>

Member Typedef Documentation

◆ const_iterator

template<class T , class IT >

typedef impl_type::const_iterator OD::ValVec< T, IT >::const_iterator

◆ const_reference

template<class T , class IT >

typedef const value_type& OD::ValVec< T, IT >::const_reference

◆ difference_type

template<class T , class IT >

typedef size_type OD::ValVec< T, IT >::difference_type

◆ idx_type

template<class T , class IT >

typedef size_type OD::ValVec< T, IT >::idx_type

◆ impl_type

template<class T , class IT >

typedef VectorAccess<T,IT> OD::ValVec< T, IT >::impl_type

protected

◆ iterator

template<class T , class IT >

typedef impl_type::iterator OD::ValVec< T, IT >::iterator

◆ object_type

template<class T , class IT >

typedef T OD::ValVec< T, IT >::object_type

◆ reference

template<class T , class IT >

typedef value_type& OD::ValVec< T, IT >::reference

◆ size_type

template<class T , class IT >

typedef IT OD::ValVec< T, IT >::size_type

◆ value_type

template<class T , class IT >

typedef T OD::ValVec< T, IT >::value_type

Constructor & Destructor Documentation

◆ ~ValVec()

template<class T , class IT >

OD::ValVec< T, IT >::~ValVec

inlinevirtual

◆ ValVec() [1/4]

template<class T , class IT >

OD::ValVec< T, IT >::ValVec

inlineprotected

◆ ValVec() [2/4]

template<class T , class IT >

OD::ValVec< T, IT >::ValVec	(	size_type	nr,
		T	typ
	)

inlineprotected

◆ ValVec() [3/4]

template<class T , class IT >

OD::ValVec< T, IT >::ValVec	(	const T *	tarr,
		size_type	nr
	)

inlineprotected

◆ ValVec() [4/4]

template<class T , class IT >

OD::ValVec< T, IT >::ValVec ( const ValVec< T, IT > & t )

inlineprotected

Member Function Documentation

◆ add()

template<class T , class IT >

OD::ValVec< T, IT > & OD::ValVec< T, IT >::add ( const T & typ )

inline

◆ addIfNew()

template<class T , class IT >

bool OD::ValVec< T, IT >::addIfNew ( const T & typ )

inlinevirtual

◆ append() [1/2]

template<class T , class IT >

bool OD::ValVec< T, IT >::append	(	const T *	tarr,
		size_type	sz
	)

inlinevirtual

◆ append() [2/2]

template<class T , class IT >

bool OD::ValVec< T, IT >::append ( const ValVec< T, IT > & oth )

inlinevirtual

◆ arr() [1/2]

template<class T , class IT >

virtual T* OD::ValVec< T, IT >::arr ( )

inlinevirtual

3rd party access

◆ arr() [2/2]

template<class T , class IT >

virtual const T* OD::ValVec< T, IT >::arr ( ) const

inlinevirtual

◆ begin() [1/2]

template<class T , class IT >

iterator OD::ValVec< T, IT >::begin ( )

inline

◆ begin() [2/2]

template<class T , class IT >

const_iterator OD::ValVec< T, IT >::begin ( ) const

inline

◆ cbegin()

template<class T , class IT >

const_iterator OD::ValVec< T, IT >::cbegin ( ) const

inline

◆ cend()

template<class T , class IT >

const_iterator OD::ValVec< T, IT >::cend ( ) const

inline

◆ clone()

template<class T , class IT >

ValVec* OD::ValVec< T, IT >::clone ( ) const

pure virtual

Implements OD::Set.

Implemented in LargeValVec< T >, LargeValVec< od_uint64 >, LargeValVec< float >, LargeValVec< idx_type >, TypeSet< T >, TypeSet< uiDirLightDlg::InitInfo >, TypeSet< uiDataPointSet::DColID >, TypeSet< SelectionArea >, TypeSet< Geom::Size2D >, TypeSet< EM::PosID >, TypeSet< VT >, TypeSet< DAGTriangleTree::DAGTriangle >, TypeSet< xT >, TypeSet< Attrib::Scaling::Trend >, TypeSet< TypeSet< Interval< float > > >, TypeSet< ColTab::MapperSetup >, TypeSet< std::pair< VT, AVT > >, TypeSet< Seis::PosKey >, TypeSet< double >, TypeSet< PlotAnnotation >, TypeSet< TypeSet< int > >, TypeSet< Color >, TypeSet< ProviderCreater >, TypeSet< Interval< float > >, TypeSet< CallBack >, TypeSet< Point2D< double > >, TypeSet< WeakPtr< T > >, TypeSet< GlobExpr >, TypeSet< Geom::Point2D< T > >, TypeSet< Math::Formula::InpDef >, TypeSet< Line2DInterSection::Point >, TypeSet< EM::ObjectID >, TypeSet< Creator >, TypeSet< BufferStringSet >, TypeSet< TrcKey >, TypeSet< BinDataDesc >, TypeSet< TrcKeyZSampling >, TypeSet< Location >, TypeSet< uiWellDahDisplay::PickData >, TypeSet< LMPropSpecificDispPars >, TypeSet< OutputSlotID >, TypeSet< VolProc::Chain::Connection >, TypeSet< PreStack::TrimStatics::Iteration >, TypeSet< od_int32 >, TypeSet< TrcKeyValue >, TypeSet< float >, TypeSet< RT >, TypeSet< WellTie::Marker >, TypeSet< IOPar >, TypeSet< uiSetupGrpCreationFunc >, TypeSet< SectionID >, TypeSet< AuxDataType >, TypeSet< FaultID >, TypeSet< Plane3 >, TypeSet< Pos::GeomID >, TypeSet< T ** >, TypeSet< int >, TypeSet< ColTab::Sequence >, TypeSet< uiGenInputFieldIdx >, TypeSet< HelpKey >, TypeSet< SamplingData< int > >, TypeSet< unsigned int >, TypeSet< FourierInterpol2D::Point >, TypeSet< KnotID >, TypeSet< Well::LoadReqs >, TypeSet< float_complex >, TypeSet< Threads::Work >, TypeSet< DataPack::ID >, TypeSet< FourierInterpol3D::Point >, TypeSet< ElasticFormula >, TypeSet< EM::SectionID >, TypeSet< MultiID >, TypeSet< FontData::StdSz >, TypeSet< Table::TargetInfo::Selection::Elem >, TypeSet< V >, TypeSet< MarkerStyle2D >, TypeSet< Coord3 >, TypeSet< Seis::DataType >, TypeSet< uiConstraint >, TypeSet< idx_type >, TypeSet< FourierInterpol1D::Point >, TypeSet< DAGTetrahedraTree::DAGTetrahedra >, TypeSet< unsigned char >, TypeSet< Geom::Point2D >, TypeSet< SeisTrcInfo::Fld >, TypeSet< GaussianNDProbDenFunc::VarDef >, TypeSet< od_int64 >, TypeSet< RowCol >, TypeSet< Attrib::TableOutput::PosAndRowIDPair >, TypeSet< Interval< double > >, TypeSet< char >, TypeSet< Geometry::ExplPlaneIntersection::PlaneIntersection >, TypeSet< GeomPosID >, TypeSet< Geom::Point2D< float > >, TypeSet< TypeSet< float > >, TypeSet< T *** >, TypeSet< TrcKeySampling >, TypeSet< SlabDimSpec >, TypeSet< StepInterval< float > >, TypeSet< GaussianNDProbDenFunc::Corr >, TypeSet< StepInterval< int > >, TypeSet< BinID >, TypeSet< Attrib::DescID >, TypeSet< SpecVar >, TypeSet< ElasticLayer >, TypeSet< visSurvey::VolumeDisplay::IsosurfaceSetting >, TypeSet< uiStoredAttribReplacer::StoredEntry >, TypeSet< MarkerStyle3D::Type >, TypeSet< uiBodyOperatorDlg::BodyOperand >, TypeSet< float * >, TypeSet< SeisInterpol::TrcPosTrl >, TypeSet< PreStackView::PSViewAppearance >, TypeSet< IdxType >, TypeSet< ::DataPack::ID >, TypeSet< Attrib::SelSpec >, TypeSet< Interval< int > >, TypeSet< Seis::GeomType >, TypeSet< MarkerStyle2D::Type >, TypeSet< OD::LineStyle >, TypeSet< DRowID >, TypeSet< InputSlotID >, TypeSet< ReflectivitySpike >, TypeSet< SamplingData< float > >, TypeSet< PosInfo::LineSet2DData::LineTrcDistStats >, TypeSet< PosInfo::CrdBidOffs >, TypeSet< Line2 >, TypeSet< PosInfo::Line2DPos >, TypeSet< Coord >, TypeSet< HdrEntryRecord >, TypeSet< TRowID >, TypeSet< QueueType >, TypeSet< ElasticModel >, TypeSet< PreStackView::GatherInfo >, TypeSet< BufferString >, TypeSet< BoolTypeSetType >, TypeSet< StickID >, TypeSet< EM::SubID >, TypeSet< Coords::AuthorityCode >, TypeSet< BinIDValueSet::SPos >, TypeSet< Attrib::InputSpec >, TypeSet< TypeSet< Interval< int > > >, TypeSet< Point2D< int > >, TypeSet< OffsetAzimuth >, TypeSet< FT >, and TypeSet< yT >.

◆ copy() [1/2]

template<class T , class IT >

OD::ValVec< T, IT > & OD::ValVec< T, IT >::copy	(	const T *	tarr,
		size_type	sz
	)

inlinevirtual

◆ copy() [2/2]

template<class T , class IT >

OD::ValVec< T, IT > & OD::ValVec< T, IT >::copy ( const ValVec< T, IT > & oth )

inlinevirtual

◆ count()

template<class T , class IT >

IT OD::ValVec< T, IT >::count ( const T & typ ) const

inline

◆ createDifference()

template<class T , class IT >

void OD::ValVec< T, IT >::createDifference	(	const ValVec< T, IT > &	oth,
		bool	must_preserve_order = `false`
	)

inlinevirtual

Removes all items present in other set.

◆ createIntersection()

template<class T , class IT >

void OD::ValVec< T, IT >::createIntersection ( const ValVec< T, IT > & oth )

inlinevirtual

Only keeps common items.

◆ createUnion()

template<class T , class IT >

void OD::ValVec< T, IT >::createUnion ( const ValVec< T, IT > & oth )

inlinevirtual

Adds items not already there

◆ empty()

template<class T , class IT >

bool OD::ValVec< T, IT >::empty ( ) const

inline

◆ end() [1/2]

template<class T , class IT >

iterator OD::ValVec< T, IT >::end ( )

inline

◆ end() [2/2]

template<class T , class IT >

const_iterator OD::ValVec< T, IT >::end ( ) const

inline

◆ erase()

template<class T , class IT >

void OD::ValVec< T, IT >::erase

inlinevirtual

Implements OD::Set.

Reimplemented in SEGY::HdrEntryDataSet.

◆ first() [1/2]

template<class T , class IT >

T & OD::ValVec< T, IT >::first

inline

◆ first() [2/2]

template<class T , class IT >

const T & OD::ValVec< T, IT >::first

inline

◆ get() [1/2]

template<class T , class IT >

T & OD::ValVec< T, IT >::get ( idx_type vidx )

inline

◆ get() [2/2]

template<class T , class IT >

const T & OD::ValVec< T, IT >::get ( idx_type vidx ) const

inline

◆ getCapacity()

template<class T , class IT >

IT OD::ValVec< T, IT >::getCapacity

inlinevirtual

◆ getIdx() [1/2]

template<class T , class IT >

idx_type OD::ValVec< T, IT >::getIdx ( const_iterator it ) const

inline

◆ getIdx() [2/2]

template<class T , class IT >

idx_type OD::ValVec< T, IT >::getIdx ( iterator it ) const

inline

◆ gtArr()

template<class T , class IT >

T * OD::ValVec< T, IT >::gtArr

inlineprotected

◆ indexOf()

template<class T , class IT >

IT OD::ValVec< T, IT >::indexOf	(	T	typ,
		bool	forward = `true`,
		idx_type	start = `-1`
	)		const

inlinevirtual

◆ insert()

template<class T , class IT >

void OD::ValVec< T, IT >::insert	(	idx_type	vidx,
		const T &	typ
	)

inlinevirtual

◆ isPresent()

template<class T , class IT >

bool OD::ValVec< T, IT >::isPresent ( const T & t ) const

inline

◆ last() [1/2]

template<class T , class IT >

T & OD::ValVec< T, IT >::last

inline

◆ last() [2/2]

template<class T , class IT >

const T & OD::ValVec< T, IT >::last

inline

◆ max_size()

template<class T , class IT >

size_type OD::ValVec< T, IT >::max_size ( ) const

inline

◆ move()

template<class T , class IT >

void OD::ValVec< T, IT >::move	(	idx_type	from,
		idx_type	to
	)

inlinevirtual

◆ nrItems()

template<class T , class IT >

virtual int64_t OD::ValVec< T, IT >::nrItems ( ) const

inlinevirtual

Implements OD::Set.

◆ operator!=()

template<class T , class IT >

bool OD::ValVec< T, IT >::operator!= ( const ValVec< T, IT > & oth ) const

inline

◆ operator+=()

template<class T , class IT >

ValVec& OD::ValVec< T, IT >::operator+= ( const T & t )

inline

◆ operator-=()

template<class T , class IT >

OD::ValVec< T, IT > & OD::ValVec< T, IT >::operator-= ( const T & t )

inline

◆ operator=()

template<class T , class IT >

ValVec& OD::ValVec< T, IT >::operator= ( const ValVec< T, IT > & oth )

inline

◆ operator==()

template<class T , class IT >

bool OD::ValVec< T, IT >::operator== ( const ValVec< T, IT > & oth ) const

inline

◆ operator[]() [1/2]

template<class T , class IT >

T& OD::ValVec< T, IT >::operator[] ( idx_type i )

inline

◆ operator[]() [2/2]

template<class T , class IT >

const T& OD::ValVec< T, IT >::operator[] ( idx_type i ) const

inline

◆ pop()

template<class T , class IT >

T OD::ValVec< T, IT >::pop

inline

◆ push()

template<class T , class IT >

bool OD::ValVec< T, IT >::push ( const T & typ )

inline

◆ removeRange()

template<class T , class IT >

void OD::ValVec< T, IT >::removeRange	(	idx_type	from,
		idx_type	to
	)

inlinevirtual

◆ removeSingle()

template<class T , class IT >

void OD::ValVec< T, IT >::removeSingle	(	idx_type	vidx,
		bool	preserver_order = `true`
	)

inlinevirtual

◆ replace()

template<class T , class IT >

void OD::ValVec< T, IT >::replace	(	T	val,
		T	newval
	)

inline

◆ reverse()

template<class T , class IT >

void OD::ValVec< T, IT >::reverse

inlinevirtual

Implements OD::Set.

◆ setAll()

template<class T , class IT >

void OD::ValVec< T, IT >::setAll ( T val )

inline

◆ setCapacity()

template<class T , class IT >

bool OD::ValVec< T, IT >::setCapacity	(	size_type	sz,
		bool	withmargin
	)

inlinevirtual

Allocates mem only, no size() change

◆ setSize()

template<class T , class IT >

bool OD::ValVec< T, IT >::setSize	(	size_type	sz,
		T	val = `T()`
	)

inlinevirtual

Parameters

sz	number of new items
val	value assigned to new items

◆ size()

template<class T , class IT >

IT OD::ValVec< T, IT >::size

inline

◆ swap() [1/2]

template<class T , class IT >

void OD::ValVec< T, IT >::swap	(	IT	idx1,
		IT	idx2
	)

inline

◆ swap() [2/2]

template<class T , class IT >

void OD::ValVec< T, IT >::swap ( ValVec< T, IT > & oth )

inline

◆ swapItems()

template<class T , class IT >

virtual void OD::ValVec< T, IT >::swapItems	(	int64_t	i1,
		int64_t	i2
	)

inlinevirtual

Implements OD::Set.

◆ useIndexes()

template<class T , class IT >

void OD::ValVec< T, IT >::useIndexes ( const idx_type * idxs )

inlinevirtual

◆ validIdx()

template<class T , class IT >

bool OD::ValVec< T, IT >::validIdx ( int64_t vidx ) const

inlinevirtual

Implements OD::Set.

◆ vec() [1/2]

template<class T , class IT >

std::vector< T > & OD::ValVec< T, IT >::vec

inline

◆ vec() [2/2]

template<class T , class IT >

const std::vector< T > & OD::ValVec< T, IT >::vec

inline

Member Data Documentation

◆ vec_

template<class T , class IT >

impl_type OD::ValVec< T, IT >::vec_

protected

Public Types

Public Member Functions

Protected Types

Protected Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

template<class T, class IT> class OD::ValVec< T, IT >

Member Typedef Documentation

◆ const_iterator

◆ const_reference

◆ difference_type

◆ idx_type

◆ impl_type

◆ iterator

◆ object_type

◆ reference

◆ size_type

◆ value_type

Constructor & Destructor Documentation

◆ ~ValVec()

◆ ValVec() [1/4]

◆ ValVec() [2/4]

◆ ValVec() [3/4]

◆ ValVec() [4/4]

Member Function Documentation

◆ add()

◆ addIfNew()

◆ append() [1/2]

◆ append() [2/2]

◆ arr() [1/2]

◆ arr() [2/2]

◆ begin() [1/2]

◆ begin() [2/2]

◆ cbegin()

◆ cend()

◆ clone()

◆ copy() [1/2]

◆ copy() [2/2]

◆ count()

◆ createDifference()

◆ createIntersection()

◆ createUnion()

◆ empty()

◆ end() [1/2]

◆ end() [2/2]

◆ erase()

◆ first() [1/2]

◆ first() [2/2]

◆ get() [1/2]

◆ get() [2/2]

◆ getCapacity()

◆ getIdx() [1/2]

◆ getIdx() [2/2]

◆ gtArr()

◆ indexOf()

◆ insert()

◆ isPresent()

◆ last() [1/2]

◆ last() [2/2]

◆ max_size()

◆ move()

◆ nrItems()

◆ operator!=()

◆ operator+=()

◆ operator-=()

◆ operator=()

◆ operator==()

◆ operator[]() [1/2]

◆ operator[]() [2/2]

◆ pop()

◆ push()

◆ removeRange()

◆ removeSingle()

◆ replace()

◆ reverse()

◆ setAll()

◆ setCapacity()

◆ setSize()

◆ size()

template<class T, class IT>
class OD::ValVec< T, IT >