Volume Statistics Attribute. More...

Inheritance diagram for Attrib::VolStats:

Public Member Functions
	VolStats (Desc &)

void	prepPriorToBoundsCalc () override

void	setRdmPaths (const TypeSet< BinID > &truepos, const TypeSet< BinID > &snappedpos) override
	For directional attributes. More...

Public Member Functions inherited from Attrib::VolStatsBase
void	initSteering () override

bool	isSingleTrace () const override

Public Member Functions inherited from Attrib::Provider
void	addLocalCompZIntervals (const TypeSet< Interval< int > > &)

virtual void	adjust2DLineStoredVolume ()

int	alignInputs (ObjectSet< Provider > &)

int	comparePosAndAlign (Provider , bool, Provider , bool, bool)

virtual bool	compDistBetwTrcsStats (bool force=false)

void	computeNewStartPos (BinID &)

void	computeRefStep ()

void	computeRefZ0 ()

void	doParallel (bool yn)

void	enableAllOutputs (bool yn=true)

void	enableOutput (int output, bool yn=true)

uiString	errMsg () const

virtual void	fillDataPackWithTrc (RegularSeisDataPack *) const

float	getApplicableCrlDist (bool) const

virtual void	getCompNames (BufferStringSet &) const

virtual void	getCompOutputIDs (TypeSet< int > &) const

Coord	getCoord (const BinID &) const

Coord	getCurrentCoord () const

BinID	getCurrentPosition () const

virtual const SeisTrcInfo *	getCurrentTrcInfo () const

const DataHolder *	getData (const BinID &relpos=BinID(0, 0), int idx=0)

const DataHolder *	getDataDontCompute (const BinID &relpos) const

bool	getDataUnavailableFlag () const

const BinID &	getDesBufStepout () const

Desc &	getDesc ()

const Desc &	getDesc () const

const TrcKeyZSampling *	getDesiredVolume () const

virtual float	getDistBetwTrcs (bool, const char *linenm=0) const

BinID	getElementStepout () const

virtual Pos::GeomID	getGeomID () const

ObjectSet< Provider > &	getInputs ()

const TrcKeyZSampling *	getPossibleVolume () const

virtual bool	getPossibleVolume (int outp, TrcKeyZSampling &)

float	getRefStep () const

float	getRefZ0 () const

const BinID &	getReqBufStepout () const

virtual BinID	getStepoutStep () const

int	getTotalNrPos (bool)

BinID	getTrcInfoBid () const

bool	is2D () const

virtual bool	isOK () const

bool	isOutputEnabled (int output) const

const TypeSet< Interval< int > > &	localCompZIntervals () const

virtual int	moveToNextTrace (BinID startpos=BinID::udf(), bool firstcheck=false)

virtual bool	needStoredInput () const

int	nrOutputs () const

virtual void	prepareForComputeData ()

virtual bool	prepPriorToOutputSetup ()

virtual void	prepSteeringForStepout (const BinID &)

void	resetDesiredVolume ()

void	resetMoved ()

void	resetZIntervals ()

void	setCurLineName (const char *)

virtual bool	setCurrentPosition (const BinID &)

void	setDataUnavailableFlag (bool yn)

virtual void	setDesBufStepout (const BinID &, bool wait=false)

void	setDesiredVolume (const TrcKeyZSampling &)

void	setExactZ (const TypeSet< float > &)

void	setExtraZ (const Interval< float > &)

virtual void	setGeomID (Pos::GeomID)

void	setNeedInterpol (bool)

void	setOutputInterestSize (bool preserve=false)

void	setPossibleVolume (const TrcKeyZSampling &)

void	setRefStep (float step)

void	setRefZ0 (float z0)

virtual void	setReqBufStepout (const BinID &, bool wait=false)

void	setSelData (const Seis::SelData *)

void	setUseSC ()

virtual void	updateCSIfNeeded (TrcKeyZSampling &) const

void	updateCurrentInfo ()

void	updateInputReqs (int input=-1)

virtual void	updateStorageReqs (bool all=false)

virtual bool	usesTracePosition () const

Public Member Functions inherited from RefCount::Referenced
void	addObserver (WeakPtrBase *obs)
	Not for normal use. May become private. More...

int	nrRefs () const
	Only for expert use. More...

void	ref () const

bool	refIfReffed () const
	Don't use in production, for debugging. More...

void	removeObserver (WeakPtrBase *obs)
	Not for normal use. May become private. More...

bool	tryRef () const
	Not for normal use. May become private. More...

void	unRef () const

void	unRefNoDelete () const

Static Public Member Functions
static const char *	allowEdgeEffStr ()

static const char *	attribName ()

static void	initClass ()

static const char *	optstackdirStr ()

static const char *	optStackDirTypeStr (int)

static const char *	optstackstepStr ()

Static Public Member Functions inherited from Attrib::VolStatsBase
static const char *	absolutegateStr ()

static const char *	gateStr ()

static void	initDesc (Desc &)

static const char *	nrtrcsStr ()

static const char *	nrvolumesStr ()

static const char *	shapeStr ()

static const char *	shapeTypeStr (int)

static const char *	steeringStr ()

static const char *	stepoutStr ()

Static Public Member Functions inherited from Attrib::Provider
static Provider *	create (Desc &, uiString &errmsg)

static uiString	prepare (Desc &)

Static Public Member Functions inherited from RefCount::Referenced
static bool	isSane (const Referenced *)

Protected Member Functions
	~VolStats ()

bool	computeData (const DataHolder &, const BinID &relpos, int z0, int nrsamples, int threadid) const override

void	getIdealStackPos (const BinID &, const BinID &, const BinID &, TypeSet< Geom::Point2D< float > > &) const

bool	getInputData (const BinID &, int zintv) override

bool	getInputOutput (int, TypeSet< int > &res) const override

void	getStackPositions (TypeSet< BinID > &) const

void	reInitPosAndSteerIdxes ()

const Interval< float > *	reqZMargin (int input, int output) const override

Protected Member Functions inherited from Attrib::VolStatsBase
	VolStatsBase (Desc &)

	~VolStatsBase ()

bool	allowParallelComputation () const override

const BinID *	desStepout (int input, int output) const override

const Interval< float > *	desZMargin (int inp, int) const override

void	init ()

int *	outputTypes () const

Protected Member Functions inherited from Attrib::Provider
	Provider (Desc &)

virtual	~Provider ()

void	addParent (Provider *prov)

virtual bool	checkInpAndParsAtStart ()

void	computeDesInputCube (int inp, int out, TrcKeyZSampling &, bool usestepout=true) const

float	crlDist () const

virtual const Interval< int > *	desZSampMargin (int input, int output) const

float	dipFactor () const

virtual bool	doNotReUseDH () const

void	fillInputRangesArray (Array2DImpl< BasicInterval< int > > &, int, const BasicInterval< int > &)

virtual bool	finalizeCalculation (bool scs)

DataHolder *	getDataHolder (const BinID &relpos)

int	getDataIndex (int input) const

float	getExtraZFromSampInterval (int, int) const

float	getExtraZFromSampPos (float) const

float	getInputValue (const DataHolder &, int inputidx, int sampleidx, int z0) const

float	getInterpolInputValue (const DataHolder &, int inputidx, float sample, int z0) const

float	getInterpolInputValue (const DataHolder &, int inputidx, float zval) const

virtual SeisMSCProvider *	getMSCProvider (bool &) const

virtual BinDataDesc	getOutputFormat (int output) const

virtual bool	getZ0StoredData (float &z0) const

float	getZAtSample (int idx) const

virtual bool	getZStepStoredData (float &step) const

float	inlDist () const

bool	isNew2DLine () const

bool	isUsedMultTimes ()

float	lineDist () const

float	maxSecureDip () const

virtual int	minTaskSize () const

virtual bool	preProcCommonToAllThreads (const DataHolder &out, const BinID &relpos)

void	removeDataHolder (const BinID &relpos)

virtual const BinID *	reqStepout (int input, int output) const

virtual const Interval< int > *	reqZSampMargin (int input, int output) const

void	setInput (int input, Provider *)

virtual bool	setNrThreads (int idx)

void	setOutputValue (const DataHolder &output, int outputidx, int sampleidx, int z0, float val) const

void	setUsedMultTimes ()

void	stdPrepSteering (const BinID &)

float	trcDist () const

virtual bool	useInterTrcDist () const

float	zFactor () const

bool	zIsTime () const

Protected Member Functions inherited from RefCount::Referenced
	Referenced ()

	Referenced (const Referenced &)

virtual	~Referenced ()

Referenced &	operator= (const Referenced &)

Static Protected Member Functions
static Provider *	createInstance (Desc &)

static void	updateDesc (Desc &)

Static Protected Member Functions inherited from Attrib::VolStatsBase
static void	updateDefaults (Desc &)

Static Protected Member Functions inherited from Attrib::Provider
static Provider *	internalCreate (Desc &, ObjectSet< Provider > &, bool &issame, uiString &)

Protected Attributes
bool	allowedgeeffects_

bool	dosteer_

TypeSet< BinID >	linepath_

TypeSet< BinID >	linetruepos_

int	optstackdir_

int	optstackstep_

TypeSet< int >	steerindexes_

Protected Attributes inherited from Attrib::VolStatsBase
int	dataidx_

Interval< float >	desgate_

Interval< float >	gate_

ObjectSet< const DataHolder >	inputdata_

int	minnrtrcs_

TypeSet< BinID >	positions_

int	shape_

const DataHolder *	steeringdata_

BinID	stepout_

Protected Attributes inherited from Attrib::Provider
ObjectSet< Provider >	allexistingprov_

bool	alreadymoved_

BinID	currentbid_

const SeisTrcInfo *	curtrcinfo_

bool	dataunavailableflag_

BinID	desbufferstepout_

Desc &	desc_

TrcKeyZSampling *	desiredvolume_

uiString	errmsg_

TypeSet< float >	exactz_

Interval< float >	extraz_

Pos::GeomID	geomid_

ObjectSet< Provider >	inputs_

bool	isusedmulttimes_

DataHolderLineBuffer *	linebuffer_

TypeSet< Interval< int > >	localcomputezintervals_

bool	needinterp_

TypeSet< int >	outputinterest_

bool	parallel_ = true

ObjectSet< Provider >	parents_

TrcKeyZSampling *	possiblevolume_

int	prevtrcnr_

ProviderTask *	providertask_

float	refstep_

float	refz0_

BinID	reqbufferstepout_

const Seis::SelData *	seldata_

BinID	trcinfobid_

bool	useshortcuts_

Detailed Description

Volume Statistics Attribute.

VolumeStatistics collects all samples within the timegate from all traces within the stepout.

If steering is enabled, the timegate is taken relative to the steering.

If the OpticalStack shape is chosen, the positions used are defined by a step and a direction: the line direction or its normal.

  VolumeStatistics stepout=1,1 shape=Rectangle|Ellipse|OpticalStack gate=[0,0]
                   steering=
  Inputs:
  0-(nrvolumes-1)         The data
  nrvolumes  -            Steerings (only if steering is enabled)

  Outputs:
  0       Avg
  1       Med
  2       Variance
  3       Min
  4       Max
  5       Sum
  6       Normalized Variance
  7       Most Frequent
  8       RMS
  9       Extreme

<>

Constructor & Destructor Documentation

◆ VolStats()

Attrib::VolStats::VolStats ( Desc & )

◆ ~VolStats()

Attrib::VolStats::~VolStats ( )

protected

Member Function Documentation

◆ allowEdgeEffStr()

static const char* Attrib::VolStats::allowEdgeEffStr ( )

inlinestatic

◆ attribName()

static const char* Attrib::VolStats::attribName ( )

inlinestatic

◆ computeData()

bool Attrib::VolStats::computeData	(	const DataHolder &	output,
		const BinID &	relpos,
		int	t0,
		int	nrsamples,
		int	threadidx
	)		const

overrideprotectedvirtual

The system will use the algorithm specified in this function to compute the attribute's outputs. The results will be stored as different series in the DataHolder output.

Parameters

output
relpos
t0
nrsamples
threadidx	thread identifier that may be handy when using multiple threads.

Implements Attrib::VolStatsBase.

◆ createInstance()

static Provider* Attrib::VolStats::createInstance ( Desc & )

staticprotected

◆ getIdealStackPos()

void Attrib::VolStats::getIdealStackPos	(	const BinID &	,
		const BinID &	,
		const BinID &	,
		TypeSet< Geom::Point2D< float > > &
	)		const

protected

◆ getInputData()

bool Attrib::VolStats::getInputData	(	const BinID &	relpos,
		int	idx
	)

overrideprotectedvirtual

Gets all imput data, including data for which a stepout is required

Reimplemented from Attrib::VolStatsBase.

◆ getInputOutput()

bool Attrib::VolStats::getInputOutput	(	int	input,
		TypeSet< int > &
	)		const

overrideprotectedvirtual

Specifies the outputs needed for calculation among all those provided by the input data; very usefull when steering used as input data

Reimplemented from Attrib::VolStatsBase.

◆ getStackPositions()

void Attrib::VolStats::getStackPositions ( TypeSet< BinID > & ) const

protected

◆ initClass()

static void Attrib::VolStats::initClass ( )

static

◆ optstackdirStr()

static const char* Attrib::VolStats::optstackdirStr ( )

inlinestatic

◆ optStackDirTypeStr()

static const char* Attrib::VolStats::optStackDirTypeStr ( int )

static

◆ optstackstepStr()

static const char* Attrib::VolStats::optstackstepStr ( )

inlinestatic

◆ prepPriorToBoundsCalc()

void Attrib::VolStats::prepPriorToBoundsCalc ( )

overridevirtual

Z refstep is known now, this is meant to be used before possible- and desired- volumes are computed

Reimplemented from Attrib::VolStatsBase.

◆ reInitPosAndSteerIdxes()

void Attrib::VolStats::reInitPosAndSteerIdxes ( )

protected

◆ reqZMargin()

const Interval<float>* Attrib::VolStats::reqZMargin	(	int	input,
		int	output
	)		const

overrideprotectedvirtual

Reimplemented from Attrib::VolStatsBase.

◆ setRdmPaths()

void Attrib::VolStats::setRdmPaths	(	const TypeSet< BinID > &	truepath,
		const TypeSet< BinID > &	snappedpath
	)

overridevirtual

For directional attributes.

Special case for attributes (like PreStack) which inputs are not treated as normal input cubes and thus not delivering adequate cs automaticly

Reimplemented from Attrib::Provider.

◆ updateDesc()

static void Attrib::VolStats::updateDesc ( Desc & )

staticprotected

Member Data Documentation

◆ allowedgeeffects_

bool Attrib::VolStats::allowedgeeffects_

protected

◆ dosteer_

bool Attrib::VolStats::dosteer_

protected

◆ linepath_

TypeSet<BinID> Attrib::VolStats::linepath_

protected

◆ linetruepos_

TypeSet<BinID> Attrib::VolStats::linetruepos_

protected

◆ optstackdir_

int Attrib::VolStats::optstackdir_

protected

◆ optstackstep_

int Attrib::VolStats::optstackstep_

protected

◆ steerindexes_

TypeSet<int> Attrib::VolStats::steerindexes_

protected

Public Member Functions

Static Public Member Functions

Protected Member Functions

Static Protected Member Functions

Protected Attributes

Detailed Description

Constructor & Destructor Documentation

◆ VolStats()

◆ ~VolStats()

Member Function Documentation

◆ allowEdgeEffStr()

◆ attribName()

◆ computeData()

◆ createInstance()

◆ getIdealStackPos()

◆ getInputData()

◆ getInputOutput()

◆ getStackPositions()

◆ initClass()

◆ optstackdirStr()

◆ optStackDirTypeStr()

◆ optstackstepStr()

◆ prepPriorToBoundsCalc()

◆ reInitPosAndSteerIdxes()

◆ reqZMargin()

◆ setRdmPaths()

◆ updateDesc()

Member Data Documentation

◆ allowedgeeffects_

◆ dosteer_

◆ linepath_

◆ linetruepos_

◆ optstackdir_

◆ optstackstep_

◆ steerindexes_