VolProc::SurfaceLimitedFiller Class Reference

Inheritance diagram for VolProc::SurfaceLimitedFiller:

Public Member Functions
	mDefaultFactoryCreatorImpl (Step, SurfaceLimitedFiller)
	mDefaultFactoryInstanciationBase ("SurfaceLimitedFiller", tr("Horizon-based painter - Advanced"))
	~SurfaceLimitedFiller ()
	SurfaceLimitedFiller ()
bool	isOK () const
bool	needsInput () const
bool	isInputPrevStep () const
bool	setSurfaces (const TypeSet< MultiID > &, const TypeSet< char > &fillside)
int	nrOfSurfaces () const
char	getSurfaceFillSide (int idx) const
const MultiID *	getSurfaceID (int idx) const
bool	usesStartValue () const
void	useStartValue (bool yn)
float	getStartValue () const
void	setStartValue (float vel)
bool	setStartValueHorizon (const MultiID *)
const MultiID *	getStartValueHorizonID () const
int	getStartAuxdataIdx () const
void	setStartAuxdataIdx (int i)
bool	usesGradientValue () const
void	useGradientValue (bool yn)
bool	isGradientVertical () const
void	setGradientVertical (bool yn)
float	getGradient () const
void	setGradient (float grd)
bool	setGradientHorizon (const MultiID *)
const MultiID *	getGradientHorizonID () const
int	getGradAuxdataIdx ()
void	setGradAuxdataIdx (int i)
bool	usesRefZValue () const
void	useRefZValue (bool yn)
void	setRefZValue (float zv)
float	getRefZValue () const
bool	setRefHorizon (const MultiID *)
const MultiID *	getRefHorizonID () const
void	fillPar (IOPar &) const
bool	usePar (const IOPar &)
bool	useHorInterFillerPar (const IOPar &)
virtual uiString	errMsg () const
void	releaseData ()
bool	canInputAndOutputBeSame () const
bool	needsFullVolume () const
bool	canHandle2D () const
od_int64	extraMemoryUsage (OutputSlotID, const TrcKeySampling &, const StepInterval< int > &) const
virtual bool	areSamplesIndependent () const
Public Member Functions inherited from VolProc::Step
	mDefineFactoryInClass (Step, factory)
virtual	~Step ()
ID	getID () const
Chain &	getChain ()
const Chain &	getChain () const
virtual const char *	userName () const
virtual void	setUserName (const char *nm)
void	resetInput ()
virtual int	getNrInputs () const
virtual InputSlotID	getInputSlotID (int idx) const
virtual void	getInputSlotName (InputSlotID, BufferString &) const
virtual int	getNrOutputs () const
virtual OutputSlotID	getOutputSlotID (int idx) const
bool	validInputSlotID (InputSlotID) const
bool	validOutputSlotID (OutputSlotID) const
virtual TrcKeySampling	getInputHRg (const TrcKeySampling &) const
virtual StepInterval< int >	getInputZRg (const StepInterval< int > &) const
virtual StepInterval< int >	getInputZRgWithGeom (const StepInterval< int > &, Survey::Geometry::ID) const
virtual void	setInput (InputSlotID, const RegularSeisDataPack *)
const RegularSeisDataPack *	getInput (InputSlotID) const
virtual void	setOutput (OutputSlotID, RegularSeisDataPack *, const TrcKeySampling &, const StepInterval< int > &)
const RegularSeisDataPack *	getOutput (OutputSlotID) const
RegularSeisDataPack *	getOutput (OutputSlotID)
int	getOutputIdx (OutputSlotID) const
void	enableOutput (OutputSlotID)
const RegularSeisDataPack *	getOutput () const
RegularSeisDataPack *	getOutput ()
virtual const VelocityDesc *	getVelDesc () const
virtual Task *	createTask ()
virtual Task *	createTaskWithProgMeter (ProgressMeter *)
virtual bool	needReportProgress ()
TrcKeyZSampling	getInputSampling (const TrcKeyZSampling &) const
virtual mDeprecated od_int64	getOuputMemSize (int) const
virtual mDeprecated od_int64	getProcTimeExtraMemory () const

Protected Member Functions
bool	prepareComp (int)
bool	computeBinID (const BinID &, int)
EM::Horizon *	loadHorizon (const MultiID &) const
int	setDataHorizon (const MultiID &, EM::Horizon3D *&, int auxdataidx) const
bool	prefersBinIDWise () const
Protected Member Functions inherited from VolProc::Step
	Step ()
const StepInterval< float > &	getZSampling () const
void	setHStep (const BinID &)
void	setVStep (int)
void	setInpNrComps (InputSlotID, int)
void	setOutputNrComps (int)
int	getNrInputComponents (InputSlotID) const
int	getNrOutComponents () const
od_uint64	getComponentMemory (const TrcKeySampling &, bool input) const

Static Protected Member Functions
static const char *	sKeySurfaceID ()
static const char *	sKeySurfaceFillSide ()
static const char *	sKeyNrSurfaces ()
static const char *	sKeyUseStartValue ()
static const char *	sKeyStartValue ()
static const char *	sKeyStartValHorID ()
static const char *	sKeyStartAuxDataID ()
static const char *	sKeyUseGradValue ()
static const char *	sKeyGradValue ()
static const char *	sKeyGradHorID ()
static const char *	sKeyGradAuxDataID ()
static const char *	sKeyGradType ()
static const char *	sKeyRefHorID ()
static const char *	sKeyRefZ ()
static const char *	sKeyUseRefZ ()

Protected Attributes
MultiID	gradhormid_
EM::Horizon3D *	gradhorizon_
int	gradauxdataselidx_
int	gradauxidx_
float	fixedgradient_
bool	usegradient_
bool	gradvertical_
MultiID	starthormid_
EM::Horizon3D *	starthorizon_
int	startauxdataselidx_
int	startauxidx_
float	fixedstartval_
bool	usestartval_
MultiID	refhormid_
EM::Horizon *	refhorizon_
float	refz_
bool	userefz_
TypeSet< char >	side_
TypeSet< MultiID >	surfacelist_
ObjectSet< EM::Horizon >	hors_
ObjectSet< Geometry::FaultStickSurface >	faults_
bool	usebottomval_
double	valrange_
Protected Attributes inherited from VolProc::Step
Chain *	chain_
ObjectSet< const RegularSeisDataPack >	inputs_
TypeSet< InputSlotID >	inputslotids_
BufferString	username_
ID	id_
uiString	errmsg_
TypeSet< OutputSlotID >	outputslotids_
TrcKeySampling	tks_
StepInterval< int >	zrg_

Private Member Functions
	mODTextTranslationClass (SurfaceLimitedFiller)

Additional Inherited Members
Public Types inherited from VolProc::Step
typedef int	ID
typedef int	InputSlotID
typedef int	OutputSlotID
Static Public Member Functions inherited from VolProc::Step
static ID	cUndefID ()
static int	cUndefSlotID ()
static mDeprecated od_int64	getBaseMemoryUsage (const TrcKeySampling &, const StepInterval< int > &)

Detailed Description

Fills a volume with values.

The borders are given by a set of horizons or faults with pre set side to calculate. The values are calculated based on v0+g*d, where for each variable we use either fixed values or from some fixed horizon reference data.

Constructor & Destructor Documentation

VolProc::SurfaceLimitedFiller::~SurfaceLimitedFiller

(

)

VolProc::SurfaceLimitedFiller::SurfaceLimitedFiller

(

)

Member Function Documentation

virtual bool VolProc::SurfaceLimitedFiller::areSamplesIndependent ( ) const

inlinevirtual

returns whether samples in the output are independent from each other.

Reimplemented from VolProc::Step.

bool VolProc::SurfaceLimitedFiller::canHandle2D ( ) const

inlinevirtual

Reimplemented from VolProc::Step.

bool VolProc::SurfaceLimitedFiller::canInputAndOutputBeSame ( ) const

inlinevirtual

Reimplemented from VolProc::Step.

bool VolProc::SurfaceLimitedFiller::computeBinID ( const BinID &  , int    )

protectedvirtual

Reimplemented from VolProc::Step.

virtual uiString VolProc::SurfaceLimitedFiller::errMsg ( ) const

inlinevirtual

Reimplemented from VolProc::Step.

od_int64 VolProc::SurfaceLimitedFiller::extraMemoryUsage ( OutputSlotID  , const TrcKeySampling &  , const StepInterval< int > &    ) const

virtual

Reimplemented from VolProc::Step.

void VolProc::SurfaceLimitedFiller::fillPar ( IOPar &  ) const

virtual

Reimplemented from VolProc::Step.

int VolProc::SurfaceLimitedFiller::getGradAuxdataIdx ( )

inline

float VolProc::SurfaceLimitedFiller::getGradient ( ) const

inline

const MultiID* VolProc::SurfaceLimitedFiller::getGradientHorizonID

(

)

const

const MultiID* VolProc::SurfaceLimitedFiller::getRefHorizonID

(

)

const

float VolProc::SurfaceLimitedFiller::getRefZValue ( ) const

inline

int VolProc::SurfaceLimitedFiller::getStartAuxdataIdx ( ) const

inline

float VolProc::SurfaceLimitedFiller::getStartValue ( ) const

inline

const MultiID* VolProc::SurfaceLimitedFiller::getStartValueHorizonID

(

)

const

char VolProc::SurfaceLimitedFiller::getSurfaceFillSide ( int  idx ) const

inline

const MultiID* VolProc::SurfaceLimitedFiller::getSurfaceID

(

int

idx

)

const

bool VolProc::SurfaceLimitedFiller::isGradientVertical ( ) const

inline

bool VolProc::SurfaceLimitedFiller::isInputPrevStep ( ) const

inlinevirtual

Reimplemented from VolProc::Step.

bool VolProc::SurfaceLimitedFiller::isOK

(

)

const

EM::Horizon* VolProc::SurfaceLimitedFiller::loadHorizon ( const MultiID &  ) const

protected

Note

horizon is reffed on return.

VolProc::SurfaceLimitedFiller::mDefaultFactoryCreatorImpl	(	Step	,
		SurfaceLimitedFiller
	)

VolProc::SurfaceLimitedFiller::mDefaultFactoryInstanciationBase	(	"SurfaceLimitedFiller"	,
		tr("Horizon-based painter - Advanced")
	)

VolProc::SurfaceLimitedFiller::mODTextTranslationClass ( SurfaceLimitedFiller  )

private

bool VolProc::SurfaceLimitedFiller::needsFullVolume ( ) const

inlinevirtual

Reimplemented from VolProc::Step.

bool VolProc::SurfaceLimitedFiller::needsInput ( ) const

inlinevirtual

Implements VolProc::Step.

int VolProc::SurfaceLimitedFiller::nrOfSurfaces ( ) const

inline

bool VolProc::SurfaceLimitedFiller::prefersBinIDWise ( ) const

inlineprotectedvirtual

Reimplemented from VolProc::Step.

bool VolProc::SurfaceLimitedFiller::prepareComp ( int  )

protectedvirtual

Reimplemented from VolProc::Step.

void VolProc::SurfaceLimitedFiller::releaseData ( )

virtual

Reimplemented from VolProc::Step.

int VolProc::SurfaceLimitedFiller::setDataHorizon ( const MultiID &  , EM::Horizon3D *&  , int  auxdataidx  ) const

protected

void VolProc::SurfaceLimitedFiller::setGradAuxdataIdx ( int  i )

inline

void VolProc::SurfaceLimitedFiller::setGradient ( float  grd )

inline

bool VolProc::SurfaceLimitedFiller::setGradientHorizon

(

const MultiID *

)

void VolProc::SurfaceLimitedFiller::setGradientVertical ( bool  yn )

inline

bool VolProc::SurfaceLimitedFiller::setRefHorizon

(

const MultiID *

)

void VolProc::SurfaceLimitedFiller::setRefZValue ( float  zv )

inline

void VolProc::SurfaceLimitedFiller::setStartAuxdataIdx ( int  i )

inline

void VolProc::SurfaceLimitedFiller::setStartValue ( float  vel )

inline

bool VolProc::SurfaceLimitedFiller::setStartValueHorizon

(

const MultiID *

)

bool VolProc::SurfaceLimitedFiller::setSurfaces	(	const TypeSet< MultiID > &	,
		const TypeSet< char > &	fillside
	)

static const char* VolProc::SurfaceLimitedFiller::sKeyGradAuxDataID ( )

inlinestaticprotected

static const char* VolProc::SurfaceLimitedFiller::sKeyGradHorID ( )

inlinestaticprotected

static const char* VolProc::SurfaceLimitedFiller::sKeyGradType ( )

inlinestaticprotected

static const char* VolProc::SurfaceLimitedFiller::sKeyGradValue ( )

inlinestaticprotected

static const char* VolProc::SurfaceLimitedFiller::sKeyNrSurfaces ( )

inlinestaticprotected

static const char* VolProc::SurfaceLimitedFiller::sKeyRefHorID ( )

inlinestaticprotected

static const char* VolProc::SurfaceLimitedFiller::sKeyRefZ ( )

inlinestaticprotected

static const char* VolProc::SurfaceLimitedFiller::sKeyStartAuxDataID ( )

inlinestaticprotected

static const char* VolProc::SurfaceLimitedFiller::sKeyStartValHorID ( )

inlinestaticprotected

static const char* VolProc::SurfaceLimitedFiller::sKeyStartValue ( )

inlinestaticprotected

static const char* VolProc::SurfaceLimitedFiller::sKeySurfaceFillSide ( )

inlinestaticprotected

static const char* VolProc::SurfaceLimitedFiller::sKeySurfaceID ( )

inlinestaticprotected

static const char* VolProc::SurfaceLimitedFiller::sKeyUseGradValue ( )

inlinestaticprotected

static const char* VolProc::SurfaceLimitedFiller::sKeyUseRefZ ( )

inlinestaticprotected

static const char* VolProc::SurfaceLimitedFiller::sKeyUseStartValue ( )

inlinestaticprotected

void VolProc::SurfaceLimitedFiller::useGradientValue ( bool  yn )

inline

bool VolProc::SurfaceLimitedFiller::useHorInterFillerPar

(

const IOPar &

)

bool VolProc::SurfaceLimitedFiller::usePar ( const IOPar &  )

virtual

Reimplemented from VolProc::Step.

void VolProc::SurfaceLimitedFiller::useRefZValue ( bool  yn )

inline

bool VolProc::SurfaceLimitedFiller::usesGradientValue ( ) const

inline

bool VolProc::SurfaceLimitedFiller::usesRefZValue ( ) const

inline

bool VolProc::SurfaceLimitedFiller::usesStartValue ( ) const

inline

void VolProc::SurfaceLimitedFiller::useStartValue ( bool  yn )

inline

Member Data Documentation

ObjectSet<Geometry::FaultStickSurface> VolProc::SurfaceLimitedFiller::faults_

protected

float VolProc::SurfaceLimitedFiller::fixedgradient_

protected

float VolProc::SurfaceLimitedFiller::fixedstartval_

protected

int VolProc::SurfaceLimitedFiller::gradauxdataselidx_

protected

int VolProc::SurfaceLimitedFiller::gradauxidx_

protected

EM::Horizon3D* VolProc::SurfaceLimitedFiller::gradhorizon_

protected

MultiID VolProc::SurfaceLimitedFiller::gradhormid_

protected

bool VolProc::SurfaceLimitedFiller::gradvertical_

protected

ObjectSet<EM::Horizon> VolProc::SurfaceLimitedFiller::hors_

protected

EM::Horizon* VolProc::SurfaceLimitedFiller::refhorizon_

protected

MultiID VolProc::SurfaceLimitedFiller::refhormid_

protected

float VolProc::SurfaceLimitedFiller::refz_

protected

TypeSet<char> VolProc::SurfaceLimitedFiller::side_

protected

int VolProc::SurfaceLimitedFiller::startauxdataselidx_

protected

int VolProc::SurfaceLimitedFiller::startauxidx_

protected

EM::Horizon3D* VolProc::SurfaceLimitedFiller::starthorizon_

protected

MultiID VolProc::SurfaceLimitedFiller::starthormid_

protected

TypeSet<MultiID> VolProc::SurfaceLimitedFiller::surfacelist_

protected

bool VolProc::SurfaceLimitedFiller::usebottomval_

protected

bool VolProc::SurfaceLimitedFiller::usegradient_

protected

bool VolProc::SurfaceLimitedFiller::userefz_

protected

bool VolProc::SurfaceLimitedFiller::usestartval_

protected

double VolProc::SurfaceLimitedFiller::valrange_

protected