4.5.17 Manage Wells
The Well Management window can be open from Survey > Manage > Wells... or from the 
icon.
The available wells imported in the project are listed on the left. Wells can be renamed, locked, removed or set as default with the buttons in the centre of the window:
Renames the selected well
Toggles the well to be read only(locked)/editable(unlocked)
Removes the selected well
Sets as a default
Allows for copying of the Well
Allows or the D/T model to be applied from one well to another
The well track, checkshot and time/depth model can be loaded and/or edited using the lower left row of icons:
The well log tools can be used to remove spikes, to smooth and to clip the logs for the loaded wells.
Markers can be imported and managed from the following icon:
Wells can also be exported to be seen on Google Earth using the 
icon. It is also possible to either import or create Multiple single wells from the icon 
.
When selecting a well on the left list, the loaded logs for this given well are listed on the right hand side. They can be renamed, removed and exported with the buttons on the right of the log list. The unit of measure of the logs can be checked or changed if needed (this does not affect the log values). The logs themselves can be moved up/down within the list. For removal and export, multiple logs can be selected.
Renames the selected log(s)
Removes the selected log(s)
Exports the selected log(s)
View/Edit unit of measure for the selected log(s)
Edit Well log
Moves up the selected log in the list
Moves down the selected log in the list
Logs can be imported from Ascii files, click on Import..., or created using mathematical expressions from the well management window, click on Create....
Other relevant information is indicated at the bottom of the window.
It is recommended to give logs the same name in all the wells. For example, the master density log should be called RHOB in every well. This enables the selection of one set of logs in all wells, ie: for use in the cross-plot tool. Please note that logs names and marker names are case sensitive during multiple selections.
The top Filter is used to filter-out the objects with selected names. For instance, to display all wells that start with letter W use "W*". This works only with text, not numbers or symbols.