Inheritance diagram for EM::dgbSurfaceWriter:

Public Member Functions
	dgbSurfaceWriter (const char fulluserexpr, const char filetype, const EM::Surface &surface, bool binary)

	dgbSurfaceWriter (const IOObj ioobj, const char filetype, const EM::Surface &surface, bool binary)

	~dgbSurfaceWriter ()

const char *	auxDataInfo (int) const

const char *	auxDataName (int) const

const StepInterval< int > &	colInterval () const

virtual int	nextStep ()

int	nrAuxVals () const

virtual od_int64	nrDone () const

int	nrSections () const

IOPar *	pars ()

const StepInterval< int > &	rowInterval () const

EM::SectionID	sectionID (int) const

const char *	sectionName (int) const

void	selAuxData (const TypeSet< int > &)

void	selSections (const TypeSet< EM::SectionID > &, bool add=false)

void	setColInterval (const StepInterval< int > &)

void	setRowInterval (const StepInterval< int > &)

void	setShift (float)
	Shift is added to z values before writing. More...

void	setWriteOnlyZ (bool yn)

virtual od_int64	totalNr () const

virtual uiString	uiMessage () const
	will be message() again in 7.x More...

virtual uiString	uiNrDoneText () const
	will be nrDoneText() in 7.x More...

bool	writeOnlyZ () const

Public Member Functions inherited from ExecutorGroup
	ExecutorGroup (const char *nm, bool parallel=false, bool ownsexecs=true)

virtual	~ExecutorGroup ()

virtual void	add (Executor *)

Executor *	getExecutor (int idx)

int	nrExecutors ()

void	setNrDoneText (const uiString &txt)
	If set, will use this and the counted nrdone. More...

Public Member Functions inherited from Executor
	Executor (const char *nm)

virtual	~Executor ()

virtual int	doStep ()

virtual bool	execute ()

bool	go (od_ostream &s, bool isfirst=true, bool islast=true, int delaybtwnstepsinms=0)

bool	go (od_ostream *s=0, bool isfirst=true, bool islast=true, int delaybtwnstepsinms=0)

Public Member Functions inherited from SequentialTask
	SequentialTask (const char *nm=nullptr)

virtual	~SequentialTask ()

bool	execute ()

ProgressMeter *	progressMeter ()

const ProgressMeter *	progressMeter () const

void	setProgressMeter (ProgressMeter *)
	Must be called before execute() More...

Public Member Functions inherited from Task
virtual	~Task ()

virtual void	controlWork (Control)

virtual void	enableWorkControl (bool=true)
	Must be called before execute() More...

virtual uiRetVal	errorWithDetails () const

virtual Control	getState () const

bool	workControlEnabled () const

Public Member Functions inherited from NamedCallBacker
	NamedCallBacker (const char *nm=0)

	NamedCallBacker (const NamedCallBacker &)

virtual Notifier< NamedCallBacker > &	objectToBeDeleted () const

bool	operator== (const NamedCallBacker &oth) const

bool	operator== (const NamedObject &oth) const

Public Member Functions inherited from CallBacker
	CallBacker ()

	CallBacker (const CallBacker &)

virtual	~CallBacker ()

bool	attachCB (const NotifierAccess &, const CallBack &, bool onlyifnew=false) const

bool	attachCB (const NotifierAccess *notif, const CallBack &cb, bool onlyifnew=false) const

void	detachAllNotifiers () const
	Call from the destructor of your inherited object. More...

void	detachCB (const NotifierAccess &, const CallBack &) const

void	detachCB (const NotifierAccess *notif, const CallBack &cb) const

virtual bool	isCapsule () const

bool	isNotifierAttached (const NotifierAccess *) const
	Only for debugging purposes, don't use. More...

void	stopReceivingNotifications () const

Public Member Functions inherited from NamedObject
	NamedObject (const char *nm=nullptr)

	NamedObject (const NamedObject &oth)

virtual	~NamedObject ()

virtual BufferString	getName () const

bool	getNameFromPar (const IOPar &)

virtual const name_type &	name () const

NamedObject &	operator= (const NamedObject &)

bool	operator== (const NamedObject &oth) const

virtual void	setName (const char *nm)

Public Member Functions inherited from ObjectWithName
virtual	~ObjectWithName ()

bool	hasName (const char *nm) const

bool	hasName (const name_type &nm) const

void	putNameInPar (IOPar &) const

Protected Member Functions
void	finishWriting ()

void	init (const char *fulluserexp)

bool	writeDouble (od_ostream &, double, const char *) const

bool	writeInt16 (od_ostream &, unsigned short, const char *) const

bool	writeInt32 (od_ostream &, od_int32, const char *) const

bool	writeInt64 (od_ostream &, od_int64, const char *) const

bool	writeNewSection (od_ostream &)

bool	writeRow (od_ostream &)

Protected Member Functions inherited from ExecutorGroup
void	findNextSumStop ()

virtual bool	goToNextExecutor ()

Protected Member Functions inherited from Executor
virtual bool	goImpl (od_ostream *, bool, bool, int)

Protected Member Functions inherited from Task
	Task (const char *nm=nullptr)

virtual bool	shouldContinue ()

Protected Member Functions inherited from NamedCallBacker
void	sendDelNotif () const

Static Protected Member Functions
static const char *	sEOL ()

static const char *	sEOLTab ()

static const char *	sTab ()

Protected Attributes
TypeSet< int >	auxdatasel_

bool	binary_

StepInterval< int >	colrange_

StreamConn *	conn_

BufferString	dbinfo_

BufferString	filetype_

int	firstrow_

BufferString	fulluserexpr_

const EM::RowColSurfaceGeometry *	geometry_

uiString	msg_

int	nrdone_

int	nrrows_

od_int64	nrsectionsoffsetoffset_

MultiID	objectmid_

int	oldsectionindex_

IOPar *	par_

int	rowindex_

TypeSet< od_int64 >	rowoffsettable_

od_int64	rowoffsettableoffset_

StepInterval< int >	rowrange_

int	sectionindex_

TypeSet< od_int64 >	sectionoffsets_

TypeSet< EM::SectionID >	sectionsel_

float	shift_

const EM::Surface &	surface_

StepInterval< int > *	writecolrange_

bool	writeonlyz_

StepInterval< int > *	writerowrange_

bool	writingfinished_

Interval< int >	writtencolrange_

Interval< int >	writtenrowrange_

Interval< float >	zrange_

Protected Attributes inherited from ExecutorGroup
int	currentexec_

TypeSet< int >	executorres_

ObjectSet< Executor > &	executors_

uiString	nrdonetext_

bool	ownsexecs_

const bool	parallel_

int	sumstart_

int	sumstop_

Protected Attributes inherited from SequentialTask
int	lastupdate_

ProgressMeter *	progressmeter_

Protected Attributes inherited from Task
Control	control_

Threads::ConditionVar *	workcontrolcondvar_

Protected Attributes inherited from NamedCallBacker
Threads::Atomic< bool >	delalreadytriggered_

Notifier< NamedCallBacker >	delnotif_

Protected Attributes inherited from NamedObject
BufferString	name_

Additional Inherited Members
Public Types inherited from Task
enum	Control { Run , Pause , Stop }

Public Types inherited from ObjectWithName
typedef OD::String	name_type

Static Public Member Functions inherited from SequentialTask
static int	ErrorOccurred ()

static int	Finished ()

static int	MoreToDo ()

static int	WarningAvailable ()

Static Public Member Functions inherited from Task
static uiString	stdNrDoneText ()

static uiString	uiStdNrDoneText ()

Static Public Member Functions inherited from CallBacker
static void	createReceiverForCurrentThread ()

static void	removeReceiverForCurrentThread ()

Public Attributes inherited from Executor
Notifier< Executor >	poststep
	Only when MoreToDo will be returned. More...

Notifier< Executor >	prestep

Detailed Description

Surface Writer.

Construct (no changes are made to filesystem)
Select what you want to write
Do NextStep

<>

Constructor & Destructor Documentation

◆ dgbSurfaceWriter() [1/2]

EM::dgbSurfaceWriter::dgbSurfaceWriter	(	const IOObj *	ioobj,
		const char *	filetype,
		const EM::Surface &	surface,
		bool	binary
	)

Sets up object, but does not touch file (that's done in nextStep() )

Parameters

ioobj	The IOObj with info about where to write data.
filetype	The filetype that should be in the file header.
surface	The surface that should be written with data.
binary	If true, writes in binary, else in ascii

◆ dgbSurfaceWriter() [2/2]

EM::dgbSurfaceWriter::dgbSurfaceWriter	(	const char *	fulluserexpr,
		const char *	filetype,
		const EM::Surface &	surface,
		bool	binary
	)

◆ ~dgbSurfaceWriter()

EM::dgbSurfaceWriter::~dgbSurfaceWriter ( )

Closes the stream

Member Function Documentation

◆ auxDataInfo()

const char* EM::dgbSurfaceWriter::auxDataInfo ( int ) const

◆ auxDataName()

const char* EM::dgbSurfaceWriter::auxDataName ( int ) const

◆ colInterval()

const StepInterval<int>& EM::dgbSurfaceWriter::colInterval ( ) const

◆ finishWriting()

void EM::dgbSurfaceWriter::finishWriting ( )

protected

◆ init()

void EM::dgbSurfaceWriter::init ( const char * fulluserexp )

protected

◆ nextStep()

virtual int EM::dgbSurfaceWriter::nextStep ( )

virtual

Return values

MoreToDo()	Not finished. Call me again.
Finished()	Nothing more to do.
ErrorOccurred()	Something went wrong.

Note: if function returns a value greater than cMoreToDo(), it should be interpreted as cMoreToDo().

Reimplemented from ExecutorGroup.

◆ nrAuxVals()

int EM::dgbSurfaceWriter::nrAuxVals ( ) const

◆ nrDone()

virtual od_int64 EM::dgbSurfaceWriter::nrDone ( ) const

virtual

Note: nrDone is only used for displaying progress and will be compared to totalNr to show user how large part of the task that is finished.

Reimplemented from ExecutorGroup.

◆ nrSections()

int EM::dgbSurfaceWriter::nrSections ( ) const

◆ pars()

IOPar* EM::dgbSurfaceWriter::pars ( )

◆ rowInterval()

const StepInterval<int>& EM::dgbSurfaceWriter::rowInterval ( ) const

◆ sectionID()

EM::SectionID EM::dgbSurfaceWriter::sectionID ( int ) const

◆ sectionName()

const char* EM::dgbSurfaceWriter::sectionName ( int ) const

◆ selAuxData()

void EM::dgbSurfaceWriter::selAuxData ( const TypeSet< int > & )

The specified data will be written. If this function is not called, all avaliable auxdata will be written.

◆ selSections()

void EM::dgbSurfaceWriter::selSections	(	const TypeSet< EM::SectionID > &	,
		bool	add = `false`
	)

The given sectionIDs will be written. If this function is not called, all avaliable sections will be written.

◆ sEOL()

static const char* EM::dgbSurfaceWriter::sEOL ( )

inlinestaticprotected

◆ sEOLTab()

static const char* EM::dgbSurfaceWriter::sEOLTab ( )

inlinestaticprotected

◆ setColInterval()

void EM::dgbSurfaceWriter::setColInterval ( const StepInterval< int > & )

◆ setRowInterval()

void EM::dgbSurfaceWriter::setRowInterval ( const StepInterval< int > & )

◆ setShift()

void EM::dgbSurfaceWriter::setShift ( float )

Shift is added to z values before writing.

◆ setWriteOnlyZ()

void EM::dgbSurfaceWriter::setWriteOnlyZ ( bool yn )

◆ sTab()

static const char* EM::dgbSurfaceWriter::sTab ( )

inlinestaticprotected

◆ totalNr()

virtual od_int64 EM::dgbSurfaceWriter::totalNr ( ) const

virtual

Reimplemented from ExecutorGroup.

◆ uiMessage()

virtual uiString EM::dgbSurfaceWriter::uiMessage ( ) const

virtual

will be message() again in 7.x

Reimplemented from ExecutorGroup.

◆ uiNrDoneText()

virtual uiString EM::dgbSurfaceWriter::uiNrDoneText ( ) const

virtual

will be nrDoneText() in 7.x

Reimplemented from ExecutorGroup.

◆ writeDouble()

bool EM::dgbSurfaceWriter::writeDouble	(	od_ostream &	,
		double	,
		const char *
	)		const

protected

◆ writeInt16()

bool EM::dgbSurfaceWriter::writeInt16	(	od_ostream &	,
		unsigned short	,
		const char *
	)		const

protected

◆ writeInt32()

bool EM::dgbSurfaceWriter::writeInt32	(	od_ostream &	,
		od_int32	,
		const char *
	)		const

protected

◆ writeInt64()

bool EM::dgbSurfaceWriter::writeInt64	(	od_ostream &	,
		od_int64	,
		const char *
	)		const

protected

◆ writeNewSection()

bool EM::dgbSurfaceWriter::writeNewSection ( od_ostream & )

protected

◆ writeOnlyZ()

bool EM::dgbSurfaceWriter::writeOnlyZ ( ) const

◆ writeRow()

bool EM::dgbSurfaceWriter::writeRow ( od_ostream & )

protected

Member Data Documentation

◆ auxdatasel_

TypeSet<int> EM::dgbSurfaceWriter::auxdatasel_

protected

◆ binary_

bool EM::dgbSurfaceWriter::binary_

protected

◆ colrange_

StepInterval<int> EM::dgbSurfaceWriter::colrange_

protected

◆ conn_

StreamConn* EM::dgbSurfaceWriter::conn_

protected

◆ dbinfo_

BufferString EM::dgbSurfaceWriter::dbinfo_

protected

◆ filetype_

BufferString EM::dgbSurfaceWriter::filetype_

protected

◆ firstrow_

int EM::dgbSurfaceWriter::firstrow_

protected

◆ fulluserexpr_

BufferString EM::dgbSurfaceWriter::fulluserexpr_

protected

◆ geometry_

const EM::RowColSurfaceGeometry* EM::dgbSurfaceWriter::geometry_

protected

◆ msg_

uiString EM::dgbSurfaceWriter::msg_

protected

◆ nrdone_

int EM::dgbSurfaceWriter::nrdone_

protected

◆ nrrows_

int EM::dgbSurfaceWriter::nrrows_

protected

◆ nrsectionsoffsetoffset_

od_int64 EM::dgbSurfaceWriter::nrsectionsoffsetoffset_

protected

◆ objectmid_

MultiID EM::dgbSurfaceWriter::objectmid_

protected

◆ oldsectionindex_

int EM::dgbSurfaceWriter::oldsectionindex_

protected

◆ par_

IOPar* EM::dgbSurfaceWriter::par_

protected

◆ rowindex_

int EM::dgbSurfaceWriter::rowindex_

protected

◆ rowoffsettable_

TypeSet<od_int64> EM::dgbSurfaceWriter::rowoffsettable_

protected

◆ rowoffsettableoffset_

od_int64 EM::dgbSurfaceWriter::rowoffsettableoffset_

protected

◆ rowrange_

StepInterval<int> EM::dgbSurfaceWriter::rowrange_

protected

◆ sectionindex_

int EM::dgbSurfaceWriter::sectionindex_

protected

◆ sectionoffsets_

TypeSet<od_int64> EM::dgbSurfaceWriter::sectionoffsets_

protected

◆ sectionsel_

TypeSet<EM::SectionID> EM::dgbSurfaceWriter::sectionsel_

protected

◆ shift_

float EM::dgbSurfaceWriter::shift_

protected

◆ surface_

const EM::Surface& EM::dgbSurfaceWriter::surface_

protected

◆ writecolrange_

StepInterval<int>* EM::dgbSurfaceWriter::writecolrange_

protected

◆ writeonlyz_

bool EM::dgbSurfaceWriter::writeonlyz_

protected

◆ writerowrange_

StepInterval<int>* EM::dgbSurfaceWriter::writerowrange_

protected

◆ writingfinished_

bool EM::dgbSurfaceWriter::writingfinished_

protected

◆ writtencolrange_

Interval<int> EM::dgbSurfaceWriter::writtencolrange_

protected

◆ writtenrowrange_

Interval<int> EM::dgbSurfaceWriter::writtenrowrange_

protected

◆ zrange_

Interval<float> EM::dgbSurfaceWriter::zrange_

protected

Public Member Functions

Protected Member Functions

Static Protected Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ dgbSurfaceWriter() [1/2]

◆ dgbSurfaceWriter() [2/2]

◆ ~dgbSurfaceWriter()

Member Function Documentation

◆ auxDataInfo()

◆ auxDataName()

◆ colInterval()

◆ finishWriting()

◆ init()

◆ nextStep()

◆ nrAuxVals()

◆ nrDone()

◆ nrSections()

◆ pars()

◆ rowInterval()

◆ sectionID()

◆ sectionName()

◆ selAuxData()

◆ selSections()

◆ sEOL()

◆ sEOLTab()

◆ setColInterval()

◆ setRowInterval()

◆ setShift()

◆ setWriteOnlyZ()

◆ sTab()

◆ totalNr()

◆ uiMessage()

◆ uiNrDoneText()

◆ writeDouble()

◆ writeInt16()

◆ writeInt32()

◆ writeInt64()

◆ writeNewSection()

◆ writeOnlyZ()

◆ writeRow()

Member Data Documentation

◆ auxdatasel_

◆ binary_

◆ colrange_

◆ conn_

◆ dbinfo_

◆ filetype_

◆ firstrow_

◆ fulluserexpr_

◆ geometry_

◆ msg_

◆ nrdone_

◆ nrrows_

◆ nrsectionsoffsetoffset_

◆ objectmid_

◆ oldsectionindex_

◆ par_

◆ rowindex_

◆ rowoffsettable_

◆ rowoffsettableoffset_

◆ rowrange_

◆ sectionindex_

◆ sectionoffsets_

◆ sectionsel_

◆ shift_

◆ surface_

◆ writecolrange_

◆ writeonlyz_

◆ writerowrange_

◆ writingfinished_

◆ writtencolrange_

◆ writtenrowrange_

◆ zrange_